What is stereo?

There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.

H.H. Scott '59

Aiwa XA-006

Power Section
Output Power:
75 W per channel at 4ohms, (THD 0,9%, 1kHz)
56 W per channel at 8ohms,  (THD 0,9%, 1kHz)
Total Harmonic Distortion:  0,018% (20Hz - 20kHz, 40 W, 8Ω)
Output bandwidth:  6 Hz - 50 kHz (less than 0,05%)
Frequency Response:  5 Hz - 80 kHz, +0,5 dB -3 dB
Pre-amp Section
S/N Ratio (IHF A curve short circuited):
Phono MM : 89 dB (5 mV input)
Tuner, CD, Aux, Tape:  107 dB
Input Sensitivity/Impedance:
Phono MM : 2,5 mV/47 kΩ
Tuner, Cd, Aux, Tape : 150 mV/47 kΩ
Phono MM Overload level:  85 mV (1kHz, THD 0,01%)
Output level/Impedance:
Tape/DAT : 150 mV/47 kΩ
Headphones : 8 - 32 ohms
Speakers : 4 -16 ohms (A + B : 8 - 16 Ohms)
RIAA Deviation:  ±0,5 dB (30Hz - 15kHz)
Power Requirements:  120/220/240 V, 50/60 Hz
Power Consumption: 140 W; (380 W mod. XA-006 E, K, Z)
Dimensions (W x H x D):  430 x 128 x 332 mm
Weight:  7,6 kg

Nessun commento:

Posta un commento