What is stereo?

There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.

H.H. Scott '59


Hi-Fi U-Turn Quick Auto-Reverse Cassette Deck with Flip Reverse Head - Our exclusive rotating head design permits precise azimuth alignment of the heads to ensure wide and extended frequency response in both directions.
Computer-controlled two-motor full-logic mechanism
"Silent mechanism" for driving head assembly
SA head for low noise and distortion
"Direct" input for direct connection with CD player, etc.
Dolby HX-Pro circuit for improved response
Dolby HX-Pro makes the dynamic range of taped recordings compatible with digital sources by dynamically adjusting bias according to the level of music.

 LC-OFC coil and lead wiring in heads for higher purity
Separate circuit construction for low interference
Low-impedance voltage-tracking regulated power supply
High-rigidity chassis and large insulators for low resonance and vibration
Fluorescent Digital Peak Display, level meters and digital counter
Auto rec mute, Music Scan, Blank Skip, A-B Repeat, Timer start (record/play) Auto tape selector
Headphone output with volume control
Frequency Response  at -20 VU:
Metal Tape :  15 - 19,000 Hz (20 - 17,000 ±3 dB)
SA/Chrome Tape :  15 -18,000 Hz (20 - 16,000 Hz ±3 dB)
Normal Tape :  15 -18,000 Hz (20 - 16,000 Hz ±3 dB)
Signal-to-Noise  Ratio :  58 dB (metal tape)
Wow and Flutter :  0,05% (WRMS)
Crosstalk (1 kHz):  60 dB
Channel Separation (1 kHz):  40 dB
Harmonic Distortion
Totaal (0 VU, 1 kHz):  1,0% (metal)
K3 (0 VU, 1 kHz) :  0,5% (metal)
Record/Playback:  SA (Sen-Alloy) head
Erese :  Two-gap ferrite head
Input Sensitivity/Impedance:  80mV/50 k Ω
Line Out :  300 mV/500 kΩ
Headphones :  0-1 mW/8 Ω (matching impedance 8 - 1 k Ω)
Dimensions (W x H x D):  435 x 132 x 335 mm (17-3/16" x 5-1/4" x 13-1/4")
Weight:  6,8 kg (15 lbs)

Nessun commento:

Posta un commento