Accuphase T-101 (1974 - 1981)

Monophonic Performance
SENSITIVITY:
Usable sensitivity; 11dBf (2,0 µV)
50 dB Quietung Sensitivity; 18dBf (4,5 µV)
VOLTAGE STANDING WAVE RATIO: 1,5
SIGNAL TO NOISE at 65 dBf (1mV): 75 dB
DISTORTION ( with Selectivity switch set to NORMAL 65 dBf (1mV) Input):
100 Hz - 0,1%
1,000 Hz - 0,1%
10,000 Hz - 0,2%
INTERMODULATION DISTORTION:
will not exceed 0,2% (antenna input 65 dBf (1 mV), 100% mod. 14 kHz and 15 kHz = 1:1)
FREQUENCY RESPONSE:
+0, -1 dB 20 Hz to 15 kHz
SELECTIVITY (with SELECTIVITY switch set to):
- NORMAL:
Alternate Channel: 55 dB
Adjacent Channel: 6 dB
- NARROW:
Alternate Channel: 100 dB
Adjacent Channel: 20 dB
CAPTURE RATIO: 2,0 dB
RF INTERMODULATION: 70 dB
SPURIUS RESPONSE RATIO: 100 dB
IMAGE RESPONSE RATIO: 80 dB
IF RESPONSE RATIO: 100 dB
AM SUPPRESSION RATIO: 55 dB
SUBCARRIER PRODUCT RATIO: 70 dB
SCA REJECTION RATIO: 60 dB
OUTPUT: 2,0 Volts

Stereo Performance
SENSITIVITY:
Usable sensitivity; 31dBf (20 µV)
50 dB Quietung Sensitivity; 38dBf (45 µV)
SIGNAL TO NOISE at 65 dBf (1mV): 70 dB
DISTORTION with SELECTIVITY switch set to NORMAL
100 Hz - 0,2%
1,000 Hz - 0,2%
10,000 Hz - 0,5%
INTERMODULATION DISTORTION:
will not exceed 0,2% (antenna input 65 dBf (1mV), Standart Stereo mod. 10 kHz)
FREQUENCY RESPONSE:
+0, -1dB 20 Hz to 15,000 Hz
STEREO SEPARATION:
100 Hz - 35 dB
1,000 Hz - 45 dB
10,000 Hz - 30 dB
STEREO AND MUTING THRESHOLD: 19 dBf (5 µV

General:
TUNING CAPACITOR: Frequency Linear 4-gang
OUTPUT IMPEDANCE:
Audio Output FIXED: 200 ohms
Audio Output CONTROLLED: 2,5K ohms
FM ANTENNA INPUTS: 300 ohm balanced, 75 ohm unbalanced
METERS:
Signal Stregth Meter
Center Tuning Meter
Multipath Meter
TUNING RANGE: 88 Mhz to 108 MHz
POWER REQUIREMENT:
Voltage selector for 100V, 117V, 220V, 240V 50/60 Hz operation
Consumption: 26 watts
SEMICONDUCTOR COMPLEMENT:
2 FET's, 7 IC's, 25Transistors, 24 Diodes
DIMENSIONS:
455 mm (18 inches) wide, 152 mm (6 inches) high, 355 mm (14 inches) deep
WEIGHT:
11,1 kg (24,4 lbs) net, 15,4 kg (33,8 lbs) in shipping carton

Products Accuphase guarantee specifications stated.

All specifications are measured in accordance with the new IHF measurement method.