Onkyo's TX-1500 proves that superb performance is a function of design and construction. This receiver has been designed for sophistication providing a variety of convenience usually found only in highest priced units. Start with Servolock, Onkyo's unique tuning system, which automatically tuners in the best reception with minimum distortion and maximum separation when the dial is set near the desired station. Once the signal is locked in, it maintains the best reception without any drift, even though changes in temperature and frequency occured
The tuner using an ingeniously designed FET/3-gang variable capacitor front end. Onkyo's TX-1500 provides 2,3 μV of usable sensitivity in mono and 5 μV in stereo mode, with in IF rejection ratio of 80 dB for extraordinary sensitivity without distortion.
2-stage, 4 element ceramic filters and quadrature detector deliver maximum frequency response with minimal distortion in the IF stage. Clean, sharp stereo reception is assured through the use of Phase Locked Loop Mutiples circuitry which synchronizes the stereo pilot signal in both phases. Phase shift is avoided and stereo separation is stable at 35 dB (1 kHz) and 30 dB (100-10,000 Hz)
The TX-1500 uses direct coupled differential main amplifier design, eliminating output capacitors which cause even more distortion. This configuration delivers excellent transient response. Overall frequency response is 20-20,000 Hz, +/-1 dB.
Power output is 75 watts per channel, minimum RMS at 4 ohms or 8 ohms, both channel driver from 20 Hz to 20 kHz with no more than 0,5% THD.
Servolock ofcourse, is the most important feature. Smooth, FM muting effectively eliminates harsh, interruptive noise as you change station.No other receiver in this price class has our transient noise killer circuit to eliminate pops and crackles when the power is tunned on. And youhave a dual tape monitor system and one-way dubbing. Plus provision for two speaker systems. And thermal protection in the power transformer.
Onkyo delivers the precision tuning of Servolock and inherent quality.Because Onkyo delivers performance... regardless of cost.
Specifications
Amplifier section
Power Output Dynamic: 70 watts total at 4Ω, 0,5% THD
Power Output Continuous:
15 +15 watt min. RMS at 8Ω or 4Ω, both channels driven, 20Hz-20kHz, with 0,5% THD
17 +17 watt min. RMS at 8Ω both channels driven, 1 kHz, 0,5% THD
20 +20 watt min. RMS at 4Ω both channels driven, 1 kHz 0,5% THD
Total Harmonic Distortion: 0,5% at rated power (0,3% at 1 watt output)
IM Distortion: 0,5% at rated power (0,3% 1 watt output)
Damping Factor: 20 (8Ω, 1 kHz, 10 watts)
Frequency Response: 20 - 30,000 Hz, ±1 dB
Sensitivity and Impedance:
Phono: 2,5 mV/ 50 kΩ
Tape Play: 150 mV/ 50 kΩ
Tape Rec: 150 mV/50 kΩ
Phono Overload: 100 mV RMS, 1 kHz, 0,5% THD
Bass Control: ±12 dB at 100 Hz
Treble Control: ±10 dB at 10 kHz
Signal-to-Noise Ratio:
Phono: 65 dB (IHF C Network)
Tape: 80 dB (IHF C Network)
RIAA Curve Deviation: ±0,8 dB at 30 Hz to 15 kHz
Tuner section
Tuning Range:
FM : 88 - 108 MHz
AM : 530 - 1605 kHz
Usable Sensitivity:
FM mono: 2,3 μV (12,4 dBf) IHF; 1,8 μV (S/N 26 dB, 40 kHz Devi>) DIN
FM stereo: 5 μV (19,2 dBf) IHF; 50 μV (S/N 46 dB, 40 kHz Devi.) DIN
50 dB Quieting Sensitivity:
FM mono: 4,5 μV (18,3 dBf)
FM stereo: 50 μV (39,2 dBf)
Intermediate Frequency: FM = 10,7 MHz; AM = 455 kHz
Capture Ratio FM: 2 dB
Image Rejection Ratio: FM = 45 dB; AM = 40 dB
Signal -to-Noise Ratio: FM mono = 65 dB; FM stereo = 60 dB; AM = 40 dB
Alternate Channel Att. FM: 60 dB
Selectivity FM: 42 dB DIN (±300 kHz, 40 kHz Devi.)
AM Suppression Ratio: 50 dB
Harmonic Distortion: FM mono = 0,25%; FM stereo = 0,5%; AM = 0,9%
Frequency Response: 30 - 15,000 Hz ±1,5 dB
Deemphasis Switch: 50 μs/ 75 μs
Stereo Separation FM: 35 dB at 1 kHz; 30 dB at 100 - 10,000 Hz
Muting level: 3 μV
Stereo Threshold: 3μV
Servo Lock lamp level: 3μV
Spurious Rejection: 78 dB (1/2 IF)
Sub Carrier Suppression: 40 dB
Tuning meter: Signal strength meter
General
Semiconductors: 1 FET, 12 Transistors, 7 ICs, 21 Diodes
Power Supply Rating: 110/120/220/240 V AC 50/60 Hz
Antennas
FM: 300 Ω balanced
AM: built in ferrite core antenna and external terminal
Dimensions (W x H x D): 439 x 149 x 310 mm (17-5/16 x 5-7/8 x 12-3/16 in)
Weight: 7,3 kg (16,1 lbs)
No comments:
Post a Comment