Specifications
Amplifier section
Circuitry: 1-st stage current mirror loaded differential
amplifier, constant current loaded all-stage direct-coupled OCL.
Continuous Power
Output: 40 watts per channel (8 ohm from
20 Hz to 20 kHz, 0,05% THD)
Total Harmonic
Distortion 20 Hz to 20 kHz from AUX):
Continuous rated
output: No more than 0,05%
20 watts per channel
power output, 8 ohms: No more than 0,3%
1 watt er channel
power output, 8 ohms: No more than 0,03%
Intermodulation
Distortion (50 Hz:7,000 Hz = 4 : 1):
Continuous rated
output: No more than 0,05%
20 watts per channel
power output, 8 ohms: No more than 0,2%
1 watt er channel
power output, 8 ohms: No more than 0,02%
Output Speaker: A, B, A+B
Damping Factor (8
ohm from 20 Hz to 20 kHz): 30
Input
Sensitvity/Impedance:
Phono : 2,5 mV/50 kΩ
Tuner : 150 mV/50 kΩ
AUX : 150 mV/50 kΩ
Tape Play : 150
mV/50 kΩ
Phono Overload Level
( THD 0,05%, 1 kHz): 180 mV
Output
Level/Impedance:
Tape Rec (DIN) : 30
mV/80 kΩ
Frequency Response:
Phono (RIAA
Equalization): 20 Hz - 20 kHz ±0,3 dB
Tuner, AUX, Tape
Play: 20 Hz - 40 kHz ±2 dB
Tone Control:
Bass : +12 dB, -10
dB (100 Hz)
Treble : +10 dB, -10
dB (10 kHz)
Loudness Contour
(Volume control set at -40 dB): +6 dB
(100 Hz), +3 dB (10 kHz)
Hum and Noise (DIN,
continuous power/50 W):
Phono : 58/66 dB
AUX, :
60/95 dB
Semiconductors: 2 x ICs, 25 x Transistors, 27 x Diodes
General
Power
Requirements: 120 V - 240 V 50/60 Hz
Power
Consumption: 420 W, Dimensions ( W x H x
D): 420 x 147 x 261 mm (16-9/16 x
5-13/16 x 12-7/8 in)
Weight: 7,5 kg (16 lb 9 oz) net
No comments:
Post a Comment