Direct-Drive
Automatic Turntable ST130
Turntable rotational
acuracy achieved in the ST 130 is attributed to the 20-pole 30-slot direct
drive motor. Rumble has been almost eliminated. Wow and fluter have also been
greatly reduced. The body designs is very compact with front operation.
Direct-Dive Motor
The high performance
DD motor has been manufactured with precision and accuracy to provide
unswerving rotational accuracy. The DD method provides motor-platter marriages
for perfection in drive.
Acoustic Feedback
Reduction
Acoustic feedback is
almost eliminated with the original independent suspension design. A design
based on vibreation damping cushions and balanced steel springs isolates the
cabinet assembly from outside vibration influences.
Oil-Damped Cueing
When the needle is
placed on the record, an original iol damping mechanism makes the contact
gently. No more damage to your records at cueing time.
Low Mass Straight
Tonearm
A low mass straight
tonearm with resonant frequency matching assures accurate tracking and gentle
care for your delicate records.
Auto Return and Auto
Shutoff
The tonearm is also
automatically returned to rest and power turned off at the end of play.This
feature frees you to enjoy play without worrying about the end of the rcord.
Pitch Control
A pitch control is
incorporated to permit adjustments for the sensitive ear. Now you can play or
sing along with your favorite recorded pieces without the noticeable difference
in pitch.
SPECIFICATIONS
Turntable
Motor: 20-pole, 30-slott, 3-phase brushless type DC
servo controlled direct drive motor
Speeds:
33⅓ and 45
r.p.m.
Speed
Calibration: Pitch control ±3%
Wow &
Flutter: 0,055% (WRMS), ±0,085% (DIN 45507)
Rumble:
Unweighted : 38 dB
(DIN 45539A)
Weighted : 65 dB
(DIN 45539B)
Turntable
platter: 308 mm aluminium alloy die-cast
with strobe outside rim
Tonearm: Straight-line tubular, static balance type
with removable headshell and antiskating device
Effective
lenght: 222 mm
Overhang: 16,8 mm
Adjustable tracking
force: 0 - 2,5 g with direct readout
weight
Usable cartridge
weight: 4 - 6,5 g
Cartridge
(optional): Moving Magnet type, model
MM3 with 0,6 mil diamond stylus
Frequency
response: 20 -20,000 Hz
Output voltage: 3 mV ±3 dB at 1 kHz 3,54 cm/sec
Channel
balance: Within 2 dB at 1 kHz
Channel
separation: More than 18 dB at 1 kHz
Load
resistance: 47 Kohm
Weight: 4,6 g
Optimum stylus
force: 1,8 g
General
Automatic
functions: Automatic return and shutoff
Power source: 120V 60 Hz for North America,220 V 50 Hz for
Europe
Power
consumption: 6 watts
Dimensions: 420 x 121 x 365 mm (W x H x D)
Weight: 4,5 kg (nett)
I have just bought one of these decks on the second hand market and the deck seems to work perfectly, except I cannot get it to produce a sound! I hear the record being played by the stylus I can see the platter is rotating at precise speed, (pitch control works fine) I have it hooked to a Kenwood receiver and I have tried hooking it up through a small preamp, in case that was the problem but still no amplifiable sound. Any suggestions?
ReplyDelete