Introducing the Technics SA-1000. With more power and less
distortion than any other receiver we've made: 330 watts per channel minimum
RMS into 8 Ω from 20 Hz-20 kHz with no
more than 0.03% Total Harmonic Distortion. But that's
only one reason to buy the SA-1000. Dynamic range is
another.
To
capture the sheer dynamics of a live symphony, there's an equally dynamic
amplifier section. Like 72,000uF worth of high capacitance filtering, separate
DC rectifiers, current-mirror loading and direct coupling. The results are
impressive: tremendous reserve power, negligible transient crosstalk distortion
and excellent stability.
And just for the record, the SA-1000's phono equalizer gives you
everything from a super-high S/N ratio of 97 dB. To a phono input that can handle a 300 mV signal at 1 kHz.
On FM
you'll get outstanding specs plus two RF stages with low-noise, 4-pole,
dual-gate MOS FETs, Technics developed fiat group delay filters and a Phase
Locked Loop IC in the MPX section.
As good as all that sounds, Technics Acoustic Control makes it sound
even better, because it adds low and high range boost and filter switches to
enhance the tone controls. There's also a midrange control with a variable
centre frequency. And 24 LED peak-power indicators that
let you keep an eye on what your ears will hear.
The
Technics SA-1000. In the world of receivers, it bats 1000.
Specifications
Power
Amp Section
Rated minimum sine wave RMS Power Output (20Hz -20kHz both
channel driven, 0,03% THD): 330 watts per channel into
8Ω and 4Ω
1
kHz Continuous Power Output (both channel driven, 0,03% THD):
340 W per channel into 8 Ω
360 W per channel into 4 Ω
Total
Harmonic Distortion:
0,03% at Rated Power (20Hz -20kHz, 8 and 4 Ω)
0,01% at half Power (20Hz-20kHz, 8 Ω)
0,02% at half Power 920Hz-20kHz, 4 Ω)
0,005% at half Power (1kHz, 8 and 4 Ω)
Intermodulation
Distortion: 0,03%
Frequency Response: 5 Hz to 90 kHz, -1 dB
Signal-to-Noise
Ratio (IHF A): 115 dB
Residual
Hum and Noise: 0,3 mV
Damping Factor: 160 at 8 Ω; 80 at 4 Ω
Input Sensitivity/Impedance: 1.5 V/ 47 k Ω
Load
Impedance:
Main
or Remote : 4 - 16 Ω
Main +
Remote : 8 - 16 Ω
Preamplifier
Section
Input
Sensitivity/impedance:
Phono
1,2 : 2,5 mV/25 k Ω. 100 k Ω
Aux :
150 mV/47 k Ω
Playback
Tape 1 : 150 mV/47 k Ω
Playback
Tape 2 : 180 mV/47 k Ω
Rec/Play
Tape 2 : 180 mV/47 k Ω
Phono max.
Input Voltage (1kHz,RMS): 300 mV
Signal-to-Noise
Ratio (IHF A):
Phono : 85
dB
Aux : 100 dB
Frequency
Response:
Phono : RIAA
standard curve ±0,2 dB
Aux : 20 Hz
- 20 kHz +0 -0,3 dB; 5 Hz - 40 kHz -1 dB
Tone
Controls
Bass : 50
Hz, -10 dB to +10 dB
Middle : 1
kHz, -8 dB to +8 dB
Middle (fo)
: 250 Hz - 5 kHz
Treble : 20
kHz, -10 dB to +10 dB
Loudness
Control (volume at -30 dB): 50 Hz +9 dB
High
Filter: 8 kHz, -12 dB / oct
Low Filter:
30 Hz, -12 dB / oct
Muting: -20 dB
Output
Voltage / Impedance
Pre
Out : Rated 1,5 V/100 Ω, max. 3 V/100
Ω
Rec Out
(Tape 1, 2) : 150 mV
Rec/Play
(Tape 2) : 20mV/ 80 k Ω
Acoustic
Controls (at tone "0" position)
Low Boost :
100 Hz, +6 dB
High Boost :
10 kHz, +6 dB
FM Tuner
Section
Frequency
Range: 88 - 108 MHz
Sensitivity: 10,3 dBf (0,9 µV IHF '58) 75 Ω
50 dB
Quieting Sensitivity
Mono :
12,8 dBf (1,2 µV IHF '58) 75 Ω
Stereo
: 36,2 dBf (17,7 µV IHF '58) 75 Ω
Total
Harmonic Distortion (Mono/Stereo):
100 Hz :
0,1% /0,1%
1 kHz :
0,1%/0,1%
6 kHz :
0,2%/0,2%
Signal-to-Noise
Ratio:
Mono : 83 dB
Stereo : 80
dB
Frequency
Response: 20 Hz - 18 kHz +0,2 -0,8 dB
Alternate
Channel Selectivity: 85 dB
Capture
Ratio: 1,0 dB
Image
Rejection at 88 MHz: 100 dB
IF Rejection
at 98 MHz: 120 dB
Spurious
Response Rejection at 98 MHz: 100 dB
AM
Suppression: 60 dB
Stereo
Separation 1 kHz / 10 kHz: 50 dB/ 40 dB
Leak Carrier
: -70 dB (19 kHz); -70 dB (38 kHz)
Antenna
Terminals: 75 Ω (Coaxial F-Type)
AM Tuner
Section
Frequency
Range: 525 - 1605 kHz
Sensitivity: 30 µV, 250µV/m
Selectivity: 35 dB
Image
Rejection at 1000 kHz: 90 dB
IF Rejection
at 1000 kHz: 80 dB
General
Power
Supply: AC 120V 60 Hz
Power
Consumption: 640 W
Dimensions (W x H x D):
630 x 191 x 536 mm
Weight: 39.5kg (87,1 lbs)
No comments:
Post a Comment