Pagine

Akai AT-2200

 If you are looking for a beatutiful start in top-quality stereo, the Akai AT-2200 await you. Perfectly matched in performance and styling, the formidable '2200 combination draws upon the latest advances in electronic audio technology to offer you truly outstanding features previously available only with systems of perhaps twice the price. Smooth, balanced flywheel tuning, new Phase Lock Loop MPX plus separate Signal and Tuning meters are featured with the AT-2200.
T Both feature deluxe wood cabinets and push-button rear panel connections. Perfectly paired for excellence in Quality and elegance in design, the Akai AT-2200 stereo tuner combine to form a stereo system of rare quality.

 Smooth, Balanced Flywheel Tuning
A large, balanced flywheel makes tuning wonderfully smooth and easy. It actually glides to the desidere setting with but the slightest turn. And its superior FM and AM circuitry assure top Fm and AM reception. With the FM Auto (Mute) switch, a muted effect is given simultaneously upon FM Auto Setting.

New FM-IF Section
The FM-IF section of the AT-2200 incorporates the latest high-efficiency IC circuitry. This section is comprised of a 6-stage limiter,detector and several auxiliary circuits which are comparable in performance to 213 different conventional components (100 transistors, 84 resistors, 25 diodes and 4 condenser). Moreover, a "quadrature" detector provides excellent linearity and minimizes distortion over an exceptionally wide frequency range.

PLL MPX Section for Good Separation and Low Distortion
New PLL (Phase Lock Loop) circuitry assures complete stability. It generates a 19 kHz phase signal that is locked to a 19 kHz pilot signal. These two provide a 38 kHz switching signal and guarantee better than 40 dB separation with less than 0,5% total (less than 0,3% monaural) harmonic distortion.
 Separate Signal Strength and FM Tuning Meters.
Two of the most remarkably deluxe features of the AT-2200 are its separate precision meters for signal strength and FM center tuning. A signal strength meter conveniently registers the relative strength of FM and AM signals to make precise tuning easier, while and FM tuning meter and FM stereo indicator lamp lets you zero-in FM tuning always right on dead-center.

Built-in AM Antenna and Versatile Connections
A built-in AM ferrire bar antenna is another convenient feature of the AT-2200 and provides excellent broadcast band reception. Multiple antenna connections, including distant and local FM antenna terminals, enable connection of the proper type of antenna for any location.

Output Level Control
The AT-2200 features a calibrated output level control to precisely match the amplifier input.
Specifications
FM TUNER SECTION
Frequency Range:  88 MHz to 108 MHz
Sensitivity (IHF):  1,9 μV
Capture Ratio:  1,3 dB
Selectivity (IHF):  More than 60 dB
Image Rejection:  More than 55dB (98 MHz)
IF Rejection:  More than 85 dB (98 MHz)
Spurious Rejection:  More than 85 dB (98MHz)
AM Suppression:  50 dB
Signal-to-Noise Ratio:  70 dB
Harmonic Distortion:
Mono:  Less than 0,3% (100% modulation)
Stereo:  Less than 0,5% (100% modulation)
Tunning Indicators:  Signal Strength meter and FM Tuning meter
Muting:  On-Off
Stereo Separation:  More than 40 dB (1 kHz)
Sub Carrier Suppression:  More than 50 dB
Output Voltage:  variable from 0 to 1000 mV (100% modulation)
Antenna Input Impedance:  300 ohms balanced, 75 ohms unbalanced
 AM TUNER SECTION
Frequency Range:  520 kHz to 1,605 kHz
Sensitivity (IHF):  180 μV/m (bar antenna), 17 μV (external antenna)
Selectivity (IHF):  More than 30 dB
Image Rejection:  More than 55 dB (1 MHz)
IF Rejection:  More than 45 dB
Signal-to-Noise Ratio:  More than 45 dB
Output Voltage:  Variable from 0 to 350 mV (30% modulation)
Antenna:  Built-in ferrite bar antenna
 MISCELLANEOUS
Semi-Conductors:  Transistors - 5;  Diodes - 7;  FETs - 1;  Ics - 3
Power Requirements:  110-120/220/240 V, 50 -60 Hz Switchable
Dimensions (W x H x D):  380 x 125 x 263 mm;  (15 x 4,9 x 10,3 inches) 

Weight:  4,2 kg (9,2 lbs)

No comments:

Post a Comment