The
Lenco L75 record player is a precision instrument of true Hi-Fi quality which will
satisfy even the most demanding music lover. The instrument can be used for stereo as well as monophonic
listening.
The
usual speeds of 16²/₃; 33¹/₃; 45 and 78 RPM can be
pre-set in click stops and the speed can also be varied continuously from 30 to
86 RPM.
The
light tonearm of the L75 is a first-class example of fine mechanical precision, and guarantees clear,
undistorted sound reproduction, with the greatest possible protection for your
records. The tonearm is lowered
onto the record by a hydraulically damped lowering device
- thereby eliminating the possibility of record or
needles being damaged whilst putting the tonearm onto the record.
Technical
Description
The very
silent 4-pole motor is spring mounted onto a rigid steel baseplate. The
dynamically balanced turntable is made of die-cast zinc, and weighs 4 kg.
The power is
transmitted from the conical motor shaft to the turntable by arubber covered
idler whell. The speed is changed by moving the idler wheel on the motor shaft.
The
miniature ball-bearings fitted
into the tonearm allow for a free sideways movement, and the knife-edge bearing
keeps friction to a minimum.
An
adjustable sliding weight enables
one to set stylus pressure exactly to suit the cartridge being used. An automatic brake comes into operation when
the turntable is switched off. All
tonearms can be supplied with an anti-skating device.
Every L75 is
supplied with a centre piece for records with a large centre hole, a
stroboscope disc for exact setting of speed, a stylus-adjusting gauge for
accurate setting of stylus overhang, a set of shock-absorbing mounting supports
and a cut out template (only required for chassis model).
Specifications
Type: Single record player
Drive: Idler drive
Motor: 4-pole synchronous with conical axis
Speeds: Four speeds 78, 45, 33-1/3 and 16-2/3
Fine Speed
Regulation: Yes, continuously adjustable
Wow and
Flutter: ±0,08% / ±0,4%
Rumble: 36 dB (unweighted); 60 dB (weighted)
Plater: Zinc-alloy
Diameter
: 306 mm
Weight
: 3,7 kg
Tone-Arm:
Lenght: 227 mm
Overhanging: 17 mm (adjustable)
Offset
Angle: 23°12' (±0,8° max.)
Material: Tubular Aluminium
Stylus
pressure: 0,5 g
Design: Power Requirement: 110 - 220V AC, 50/60 Hz
Finish: Polychromatic Dark Grey and Silver
Dimensions: 445 x 335 x 150 mm
No comments:
Post a Comment