Sansui 200

 AM/FM Multiplex Stereo Tuner Amplifier

This attractive solid state compact was created especially for the person who has never owned a quality stereo system before. Attach a small set of speaker systems to it and you're ready for rich FM stsreo reception, plus regular FM and AM programs like you've never heard them before. The 200, despite its compact size and moderate price, incorporates all on Sansui's sophisticated audio know-how, such as an FET frontend for unparalleled FM sensitivity and selectivity, and automatic FM stereo/mono switching. At your convenience, you can start to add other components. A quality stereo turntable, stereo tape deck or recorder, stereo headphones and other components. You can built the 200 into a complete audio system. At 17 watts the Sansui 200 has enough power to fill the average home without straining. Weighing only 13,2 lbs., it is lighter than many conventional radios capable of receiving AM broadcasts only. If you've thought you could never afford to move up into the world of professional stereo before, we invite you to investigate the Sansui 200 more throughly. We think it could change your mind completely.

Features

FET Front-End

Silicon Transistor Circuitry

Sepp. OTL output Stage

FM Stereo Separation

Automatic FM stereo/Mono Switching

Sensitive Ferrite  Antenna

One-Touch Antenna Terminals

Wide Tuning Dial

Ground Terminal

Double Transistor Protection

Full System Inputs and Outputs

Complete Sound Control

AC Outlet

Operates on 8 Voltages

Specifications

Audio Section

Music Power Output (IHF):  17 W at 4 Ω;  14 at 8 Ω

Continuous Power Output (each channel):   6,5/6,5 W at 4 Ω;  5/5 W at 8 Ω

Total Harmonic Distortion:  less than 1% at rated output

Power Bandwidth (IHF):  30 to 25,000 Hz (at 8 Ω load)

Frequency Response (at normal listening level):

Aux over all :  25 to 30,000 Hz  ±2 dB

Channel Separation (at 1  kHz rated output):

Phono :  better than 40 dB

Aux :  better than 45 dB

Hum and Noise (IHF):

Phono :  better than 65 dB

Aux :  better than 70 dB

Input Sensitivity (at 1 kHz rated output):

Phono :  3 mV/ 50 k Ω

Aux :  180 mV/ 100 k Ω

Tape Mon (PIN) :  180 mV/ 100 k Ω

Tape recorder (DIN) :  180 mV/ 100 k Ω

Recording Output:

Tape Rec (PIN):  180 mV

Tape Recorder (DIN):  30 mV

Load Impedance:  4 to 16 Ω

Damping Factor:  20 at 8 Ω load

Equalizer Phono:  RIAA, NF type

Tone Controls:

Bass :  ±10 dB at 50 Hz

Treble :  ±8 dB at 10 kHz

Loudness Control (volume control at -30 dB):  +8 dB at 50 Hz ; +3 dB at 10 kHz

Switches

Selector :  Phono; FM Auto;  AM;  Aux

Tape Monitor :  Off, On

Mode :  Stereo, Mono

Other Special Features:

DIN Connector for Tape Recorder, Direct Tape Monitor,Head Phone jack.

FM Tuner Section

Tuning Range:  88 to 108 MHz

Sensitivity:

20 dB quieting :  2,5 µV

IHF :  3 µV

Harmonic Distortion:  less than 1%

Signal-to-Noise ratio:  better than 50 dB

Selectivity:  better than 35 dB at 98 MHz

Capture ratio (IHF):  3 dB

Image Frequency Rejection:  better than 45 dB at 98 MHz

IF Rejection:  better than 65 dB at 98 MHz

Spurious Response Rejection:  better than 65 dB at 98 MHz

Spurious Radiation:  less than 34 dB

Antenna Input Impedance:  300 Ω balanced

FM Stereo Separation:  better than 30 dB at 400 Hz

AM Tuner Section

Tuning Range:  535 to 1605 kHz

Sensitivity:  51 dB/m at 1 kHz (bar antenna)

Image Frequency Rejection:  better than 30 dB at 1 kHz

IF rejection:  better than 45 dB

Selectivity:  better than 20 dB

Other Special Features:  FM Linear Scale Dial; Signal Strength Meter; Fly -wheel Tuning; AM ferrite Bar Antenna; FM Stereo Auto; FM SCA Filter

Semiconductors:  29 Transistors; 1 FET; 2 Varistors; 14 Diodes.

Power Requirement:  100,110,117,127,220,230, 240, 250 V  50/60 Hz

Power Consumption:   45 VA (max signal)

Dimensions (W x H x D):  15-7/8" x 4-9/16" x 11-1/16"

Weight:  13,2 lbs