AM/FM
Multiplex Stereo Tuner Amplifier Solid State
With most of
the same design and performance features of the larger Sansui 800, this model
is the most complete receiver available anywhere under 50 watts. For better FM
performance, it too, features an FET and 3-gang capacitor frontend. In addition
to improved FM sensitivity and selectivity (S/N ratio of better than 50 dB),
the Model 350's FM section provides channel separation of better than 30 dB.
At home
within a wide 30 to 20,000 Hz power bandwidth, the 350 keeps distortion below a
negligible 1% and features a damping factor of 34 at 8 ohms.
Other
large receiver features include an ability to power up to two speaker systems,
to operate off both 75 and 300 Ω
antennas, and automatic FM mono stereo switching.
Specifications
Amplifier
Section
Music
Power (IHF): 46 watts at 8 Ω ±1 dB
Continuous
Power: 18 / 18 watts at 8 Ω ±1 dB
Harmonic
Distortion: less than 1,0% at rated
output
Power
Bandwidth (IHF): 30 - 20,000 Hz (at 8 Ω)
Input
Sensitivity (for rated output):
Phono : 2,2 mV (±3 dB)
Aux : 150 mV (±3 dB)
Tape Monitor
[PIN, DIN] : 150 mV (±3 dB)
Hum and
Noise (IHF):
Phono : 60 dB
Aux : 65 dB
Damping
Facator: 34 at 8 Ω
Output
Impedance: 8 Ω and 16 Ω
FM Tuner
Section
Frequency
Range: 88 - 108 MHz
Sensitivity: 2,5 µV
±3 dB (S/N 20 dB quieting)
Sensitivity: 3,0 µV
±3 dB (IHF)
Selectivity: better than 45 dB
FM Stereo
Separation: better than 30 db
AM Tuner
Section
Frequency
Range: 535 - 1605 kHz
Sensitivity
(IHF): 25 µV at 1 MHz (±3 dB)
Selectivity: better than 20 dB at 1 MHz
Seminonductors: 31 Transistors ; 21 Diodes ; 4 Varistors
Power Voltage:
100, 117, 220 and 240 V; 50/60 Hz
Power
Consumption: 90 VA max
Dimensions
(W x H x D): 15-13/16 x 4-1/2 x 13-1/8
inch
Weight: 19,5 lbs
No comments:
Post a Comment