Stereo
Integrated Amplifier (1980)
Specifications
Power
Output " 30 W per channel minimum
RMS Power (with 8 Ω loads, both
channel driven, from 20 - 20,000 Hz;no more than 0,05% THD from 250 mW to rated
output)
Continuous
RMS Power Output (less than 0,05% THD, both channel driven simultaneously):
At 1
kHz : 30 W + 30 W (8 Ω)
At 20
- 20,000 Hz : 30 W + 30 W (8 Ω)
According
to DIN 45500 : 30 W + 30 W (8 Ω)
Power
Bandwidth (IHF): 20 - 20,00 Hz
Harmonic
Distortion: less than 0,05% (at rated
output)
IM
Distortion: less than 0,02% at rated
output
Frequency
Respone:
Phono : RIAA equalizatio curve ±0,3 dB
Tuner, AUX,
Tape : 5 - 60,000 Hz +0, -2 dB
Residual
Noise: less than 100 V (8 Ω, network A)
Damping
Factor: 40 (8 Ω, 1 kHz)
Inputs
Sensitivity/Impedance:
2,5 mV
(-50 dB)/50 k Ω
Tuner, Aux,
Tape :140 mV (-15 dB)
Phono
Maximum Input Capability (0,1% distrotion,1 kHz): 220 mV
S/N
(weighting network, input level):
Phono : 80 dB (A, 2,5 mV)
Tuner, Aux,
Tape : 100 dB (A, 140 mV)
Outputs
Voltege/ Impedance:
Rec
Out : 140 mV (-15 dB)/4,7 k Ω
Tone
Controls:
Bass : ±10 dB at 70 Hz (turnover frequency : 400 Hz)
Treble
: ±10 dB at 30 kHz turnover frequancy3
kHz) :
Loudness :
+8 dB at 100
Hz
+4 dB at 10
kHz
Power
requirement: 120 V, 220 V, 240 V, 50/60
Hz
Power
Consumption: 75 W (US model)
AC Outlets:
1 switched, 100 W
Weight: 5,8 kg (12 lb 13 oz) Net
No comments:
Post a Comment