The Pioneer
SA-800 is a professional stereo amplifier that, in performance and
specifications, ranks with the very finest of high power units now being
manufactured taday. It has a multitude of features that make it suitable for
most anyone's home stereo system, but especially one that requires
multiple-purpose versatility.
The SA-800
employs all-stage direct coupling circuitry in the power amplifier section, a
vast improvement over conventional circuitry using coupling capacitors, and the
result is an astonishingly wide power bandwidth of 5 - 50,000 Hz (at 8 ohms).
The unit
also has a high-grade protector circuit using relays and transistor which
safeguards the speakers and output transistors under all conditions.
There are
two sets of tape terminals for easy tape-to-tape duplicating; there are also
dual phono terminals which can accommodate both moving magnet and moving coil
cartridge turntables. There are other extras, too, which make the SA-800 a
truly professional instrument as well as tremendous investment in the kind of
quality that Pioneer continues to make famous.
Specifications
Power
Amplifier Section
Music Power
Output (IHF): 165 watts at 4 ohms; 108
watts at 8 ohms
Continuous
Power Output (each channel driven):
53 watts /
53 watts at 4 ohms
41 watts /
41 watts at 8 ohms
Continuous
Power Output (both channel driven):
39 watts +
39 watts at 4 ohms
34 watts +
34 watts at 8 ohms
Power Output
in the range of 20 to 20,000 Hz (both channel driven):
26 watts +
26 watts (8 ohms, harmonic distortion less than 0,5%)
Total
Harmonic Distortion: less than 0,5%
Intermodulation
Distortion: less than 0,5%
Power
Bandwidth (IHF): 5 to 50,000 Hz (8 Ω, THD less than 0,5%)
Frequency
Response: 5 to 80,000 Hz ±1 dB
Input
Sensitivity/Impedance: 560 mV/100 k Ω (1 kHz continuous power output)
Speakers: 4 to 16 Ω
Damping
Factor: 65 (8 Ω, 1 kHz)
Center
Channel Output : 500 mV
Preamplifier
Section
Output
Voltage: 3 V (rated output); 5 V (max.)
Harmonic
Distortion: less than 0,1%
Frequency
Response: 20 to 60,000 Hz ±1 dB
Input
Sensitivity/Impendance:
Phono
1 (Mag) : 3 mV/50 k Ω
Phono
1 (Cer) : 56 mV/100 k Ω
Phono
2 (MM): 3 mV/50 k Ω
Phono
2 (MC): 110 µV/30 Ω
(with phono
input transformer model PP-402)
Mic
: 2,3 mV/25 k Ω
Tuner
: 230 mV/200 k Ω
Aux 1,
2 : 230 mV/200 k Ω
Tape
Monitor 1, 2 : 230 mV/200 k Ω
Recording
Output:
Tape Rec 1,
2 (Pin Jack) : 230 mv
Tape rec
(DIN) : 35 mV
Tone
Control:
Bass : -9 dB, +12 dB at 100 Hz (3 dB step)
Treble
: -12 dB, +9 dB at 10 kHz (3 dB step)
Low Filter
: -3,5 dB/ 60 Hz (12 dB/oct)
High Filter
: -3 dB/6 kHz (12 dB/oct)
Equalization
Curve: Phono - RIAA standard
Loudness
Contour: +11,5 dB/100 Hz ; +6 dB/10 kHz,
with volume control set at -40 dB position
Muting: -20 dB
Hum and
Noise(IHF):
Phono : more than 80 dB
Tuner, Aux
: more than 100 dB
Channel
Separation (1 kHz):
Phono : more than 50 dB
Tuner, Aux
: more than 55 dB
Miscellaneous
Power
Requirement: 110, 120, 130, 220, 240 V
(switchable) 50/60 kHz
Power
Consumption: 230 watts (max.)
Dimensions
(W x H x D): 430 x 145 x 337 mm
(16-15/16" x 5-11/16" x 13-1/4")
Weight: 10,3 kg (23 lb) net
biutyfull
ReplyDelete