Pagine

Rotel RX-404

 AM/FM Stereo Receiver RX-404 Features:
Direct-coupled Darlington OCL complementary power amplifier
Plus-minus split power supply
Class A operation direct coupled NF tone control amplifier
FM MOS FET front-end for high sensitivity.
FM PLL MPX section
FM LF section with IC, ceramic filters and quadrature detector
Two direct-reading peak power meters
Dual-function tuning meter
Tape monitor
FM muting switch
Stepped volume and bass / treble controls
Loudness switch and subsonic filter (12 dB/oct)
Specifications:
Power Amp Section
Power Output: 
30 watts per channel min. RMS both channels driven into 8 Ω from 20-20,000 Hz with no more than 0,06% THD
34 watts per channel min. RMS both channels driven into 4 Ω from 20-20,000 Hz with no more than 0,06% THD
Intermodulation Distortion (50 Hz : 7,000 Hz = 4:1): 
No more than 0,1% (Continuous rated power )
No more than 0,05% (15 watts per channel power output, 8 Ω)
No more than 0,05% (1 watt per channel power output, 8 Ω)
Total Harmonic Distortion: 
No more than 0,1% (Continuous rated power )
No more than 0,05% (15 watts per channel power output, 8 Ω)
No more than 0,05% (1 watt per channel power output, 8 Ω)
Damping Factor:  40 (20-20,000 Hz 8 Ω)
Pre Amp Section
Input Sensitivity/Impedance: 
Phono :  2,5 mV/47 k Ω
Aux, Tape In :  150 mV/33 k Ω
Overload Level (max. Input level, THD 0,5%, 1 kHz):
Phono :  160 mV
Aux :  not less than 5 V
Output Level/Impedance:
Tape Out :  300 mv/600 Ω
Tape Out (DIN) :  100 mv/90 k Ω
Frequency Response:
Phono :  30 Hz - 15,000 Hz ±0,4 dB (RIAA)
Aux, Tape In :  8 Hz - 45,000 Hz +0,3 -2,0 dB
Hum and Noise (IHF, A-network rated power):
Phono :  75 dB
Aux, Tape In :  85 dB
Tone Cotrol
Bass :  ±10 dB at 50 Hz
Treble :  ±10 dB at 20 kHz
Low Filter (Subssonic):  16 Hz (12 dB/oct)
Loudness Contour:  +10 dB at 100 Hz/ +4 dB at 10 kHz
FM Tuner Section
Usable Sensitivity:
Mono :  10,8 dBf (1,9 µV/300 Ω)
Stereo :  18,8 dBf (4,8 µV)
50db Quieting Sensitivity:
Mono :  16,8 dBf (3,8 µV)
Stereo :  38,2 dBf (44 µV)
Signal-to-Noise Ratio: 
Mono :  70 dB (at 65 dBf)
Stereo :  65 dB
Distortion (65 dBf):
At 100 Hz [mono/stsreo];  0,15%/0,25%
At 1 kHz [mono/stsreo] :  0,15%/0,25%
At 6 kHz [mono/stereo] :  0,25%/0,35%
Frequency Response:  30 Hz to 15,000 Hz +1 -3 dB
Capture Ratio:  1,0 dB
Alternate Channel Selectivity:  60 dB
Spuriouss Response Ratio:  70 dB
Image Response Ratio:  50 dB
IF Resposne Ratio:  65 dB
AM Supression Ratio:  55 dB
Stereo Separation:  40 dB (at 1 kHz); 30 dB (from 50-15,000 Hz)
Subcareier Product Ratio:  55 dB
SCA Rejection Ratio:  60 dB
Antenna Input:  300 Ω (balanced); 75 Ω (unbalanced)
AM  Tuner Section
Sensitivity: 
AM :  250 µV/m
LV :  550 µV/m
Selectivity:  23 dB
Signal-to-Noise Ratio:  45 dB
Image Response Ratio:  38 dB
IF Response Ratio:  40 dB
Antenna:  Built-in ferrite loopstic antenna
Miscellaneous:
Power Supply:  110-120 V, 220-130 V AC, 50/60 Hz
Power Consumption:  220 watts (max)
Dimensions (W x H x D):  430 x 145 x 316 mm (16-15/16" x 5-11/16" x 12-7/16")
Weight:  8,0 kg (17 lbs)

No comments:

Post a Comment