Specifications
Continuous Power Output:
110
watts per channel (min. RMS, both channels driven into 8 Ω from 20 to 20,000 Hz with no more than 0,1% THD)
Total Harmonic
Distortion: 0,1% (max. at rated power
output from 20 to 20,000 Hz ID))
IM Distortion: 0,3% (1 kHz at rated power output, -1dB)
Frequency
Response: 3 - 100,000 Hz(±1 dB at 1 watt
per channel)
Input
Sensitivity/Impedance: 980 mV/33 kΩ
Damping Factor: 80 (±10 %)
Speaker
Impedance:
4 to 16 ohms (A,
B or C)
8 to 16 ohms (A + B,
A + C, B + C)
Pre -amplifier Section:
Output
Voltage/Impedance: 980 mV/100 Ω, 2 V max.
Harmonic
Distortion: Less than 0,08% at rated
output voltage
Frequency
Response: 3 to 50,000 Hz, ±1 dB
Signal-to-Noise
Ratio:
Phono 1 & 2, Mic
: more than 75 dB (IHF "A" network closed circuit)
Tape, Tuner, Aux 1
& 2 : more than 95 dB (IHF "A" network closed circuit)
Residual Noise: Less
than 1 mV
Input
Sensitivity/Impedance:
Phono 1 &2 : 2,
4, 8 mV/25, 50, 100 kΩ (adjustable)
Tape,
Tuner, Aux 1 & 2 : 150 mV/50 kΩ
Mic :
2,5 mV/50 kΩ
Output level
Tape
Out (RCA Jack) : 350 mv/3,3 kΩ
Tape
Out (DIN) : 120 mV/90 kΩ
Phono Overload: More than 300 mV at 0,1% THD
Phono Equalization
(RIAA Standard): ±0.2 dB
Tone Controls Bass
at 100 Hz :
±10 dB (400 Hz
turnover);
±7 dB (200 Hz
turnover)
Tone Control Treble
at 10 kHz :
±7 dB (5 kHz
turnover);
±10 dB (2,5 kHz
turnover)
Filters:
High: 12 dB/oct at 8 kHz, 12 kHz
Low: 12
dB/oct. at 30 Hz, 15 Hz (subsonic)
Subsonic Fiter: 15
Hz
Loudness Control:
+20 dB at 50 Hz/+6
dB at 10 Hz ;
+10 dB at 50 Hz/+3
dB at 10 kHz (2-position)
Audio Muting: -10 dB,
-20 dB (2-position)
Crosstalk: 50 dB
overall
General Info
Semiconductors
Used: 62 Transistors; 1 ICs; 28 Diodes
Power
Consumption: 850 watts max.
Dimensions (W x H x D): 540 x 180 x 430 mm
Weight: 22 kg (48.4 lbs) net
No comments:
Post a Comment