Superior 3-Head
Fidelity with Advanced Features
The AD-F880 is a
quality 3-head deck with a variety of advanced features for superb high
fidelity performance.
The 3-head design
incorporates AIWA's super DX recording and playback heads which feature cores
are wound with PC-OCC (Pure Copper-Ohno Continuous Casting) copper wire having
ultra high conductivity for greater musical resolution.
The die-cast alloy
Bias Shield Head Block minimizes interfrence between the recording and playback
heads.
AIWA's original
micro-grain surfaced dual capstan drive improves tape transport performance,
while the ATMS (anti-modulation tape stabilizer) damps out resonance for
clearer sound reproduction. The manual
recording calibration system and bias fine adjustor allow optimum recording
performance with any tape formulation you use.
Dolby B and C noise reduction systems work to reduce unwanted tape hiss,
while Dolby HX professional circuitry works during recording to extend high
frequency response with any type tape.
Convenience extras
like wireless remote control, feather-touch IC logic controls, an electronic
tape counter with memory rewind and repeat, and more make the Ad-F880 the kind
of deck you can depend on for quality cassette performance.
Specifications
Track: 4-track, 2-channel
Tape
Speed: 1⅞ lps (4,8 cm/sec)
Frequency Response
Normal tape (0
VU): 20 - 11,000 Hz (±3 dB)
CrO₂ tape (0
VU): 20 - 14,000 Hz (±3 dB)
Metal tape (0
VU): 20 - 17,000 Hz (±3 dB)
Normal Tape, (at -20
VU): 20 - 17,000 Hz (±3 dB)
CrO₂ Tape, (at -20
VU): 20 - 18,000 Hz (±3 dB)
Metal Tape, (at -20
VU): 20 - 19,000 Hz (±3 dB)
Signal-to-Noise Ratio:
Dolby B
(Metal): 68 dB
Dolby C (Metal, above 5 kHz): 78 dB
Wow and Flutter
(WRMS): 0,035%
Forward and Rewind
Time for C-60 Tape: 60 sec.
Head:
REC : Super DX Head
PB: Super DX Head
Erase Head: Double-gap Sendust Head
Motors: DC servo motor x 1, and DC motor x 1
Input
Sensitivity /Impedance (Line-In): 50 mV/50 kΩ
Output Level
Impedance:
Line
Out: 0,45 V/47 kΩ or higher
Headphone: 0,8 mW/32 Ω
Power Source: AC
110-120/220-240 V, 50/60 Hz
Dimensions (W x H x
D): 430 x 126 x 317 mm
Weight: 5,2 kg
No comments:
Post a Comment