DTR-2000 is
one of the first DAT (Digital Audio Tape)Recorder created for consumer users . By incorporating
the SCMS (Serial Copy Management System), it enables users to make as many
direct, first-generation digital dubs of CD's and other digital program sources
as they wish, while limiting the ability to make digital copies of copies.
It also
features an advanced version of Denon's 20-bit Super-Linear D/A
(digital-to-analog) converter, called the lambda SLC. The DTR-2000 comes with full-function remote
control and complements ita analog connectors with both optical and coaxial
digital inputs and outputs. While a number of manufactures have adopted one
form or another of 1-bit D/A conversion. Denon has chosen instead to remain
with the eight-times-oversampling, 20-bit Lambda SLC system, originally
developed for its top CD players.
The Lambda
enhancement is designed to minimize the zero-crossing distortion that is
characteristic of most multibit D/A converters. Non-linearity is reduced still
further by very careful factory adjustment of the converter's MSB (most-significant-bit) registers. At the
other end of the process, ahigh-speed analog-to-digital converter is used to
quantize analog input signals.
The
transport mechanism inside the deck is similar to that of a miniature VCR and
uses the same helical-scan principle. The high tape-to-head speed needed for
mutimegahertz frequency response, is achieved with a pair of heads mounted in a
rapidly rotating drum set at an angle to the longitudinal direction of the
tape.
Features:
Optical and
coaxial digital input and outputs as well as analog inputs and outputs
Sigma/Delta
A/D converters
Lambda SLC
20-bit D/A converters with eight-times oversampling
22-segment
per channel peak-level display with Over indicator
Digital
readout of elapsed time from start of tape, remaining time on tape, elapsed
time in current selection, or linear tape counter
Direct acces
to selections up to No. 99
Editable
Start, Skip, and End ID subcode markers with fine-cue control and renumbering
facility
Full-function
remote control
Two
fast-winding modes (250 and 400 times normal speed) plus cue-and-review
Adjustable
digital fader
Supports
standard 48- and 44,1 kHz sampling rates
and half-speed (32 kHz) mode
Three-step
display brightness control
Can be
activated by external timer
Specifications:
Type: Rotary head DAT deck
Tape
Speed: 8,15 mm/s
Fast-forward/rewind
Time C-120
Normal
: 39 seconds
High-speed
: 27 seconds
Speed
Error: 0,02%
Line Input
(indicated 0 dB): 0,56 volt
Line Output
(indicated 0 dB): 2,11 volts
Sampling
Frequencies:
Recording: 32 kHz, 48 kHz, 44,1 kHz
Playback
: 32 kHz, 44,1 kHz, 48 kHz
Head: Amorphous Head
Total
Frequency Response:
Standard
Mode: 2 Hz to 22 kHz ±0,5 dB
Total
Signal-to-Noise ratio: 90 dB
Total
Dynamic Range: 90 dB
Total
Harmonic Distortion: 0,008%
Wow and
Flutter: below measurable limits
Power
Supply: 110 V, 120 V - 220 V , 240 V,
50/60 Hz
Power
Consumption: 18 W
Dimensions
(W x H x D): 434 x 122 x 320 mm
(17-3/32" x 4-51/64" x 12-19/32")
Weight: 7,2 kg
Remote
Control Unit: RC-409
No comments:
Post a Comment