Pagine

Rotel RX-202



Specifications:
Amplifier Section
Continuous Power Output: 
15 watts per channel, min. RMS all channels driven into  Ω form 50 to 20,000 Hz with no more than 1% Total Harmonic Distortion
17 watts per channel,, min. RMS, all channel driven into 8 Ω at 1 kHz with no more than 1% Total Harmonic Distortion
IM Distortion:  less than 0,5% at rated output
Frequency Response:  20 to 70,000 Hz ±3 dB at 1 watt
Damping Factor:  30 ( 8 Ω, 1 kHz)
Input Sensitivity/ Impedance:
Tape Monitor :  110 mV/40 k Ω
Tape, Aux :  110 mV/40 k Ω
Phono mag. :  2,2 mV/45 k Ω
Phono Cer. :  130 mV/100 k Ω
Phono Overoad:  80 mV (1 kHz)
Phono Equalization:  RIAA S.T.D. ±1,5 dB
Bass Control:  ±10 dB at 100 Hz
Treble Control:  ±10 dB at 10 kHz
Loudness Control:  ±10 dB/100 Hz;  =5 dB/10 kHz
Crosstalk:  50 dB/10 kHz
Hum and Noise:
Phono :  65 dB
Tape :  80 dB
Residual 0,5 mV
Speaker Impedance:  4 to 16 Ω
FM Tuner Ssection
Frequency Range:  88 to 108 MHz
Sensitivity (IHF):  2,9 microvolts
Signal-to-Noise Ratio:  65 dB
Harmonic Distortion:  0,2%
Selectivity:  40 dB ±400 kHz
Capture Ratio:  3 dB
Stereo Separation:  35 dB at 1 kHz
IF Rejection:  70 dB
Image rejection:  55 dB
Spurious Response rejection:  70 dB
SCA Suppression:  60 dB
AM Suppression:  54 dB
AM Tuner Section
Frequency Range:  525 to 1650 kHz
Sensitivity:  20 microvolts
Selectivity:  25 dB ±10 kHz
IF Rejection:  45 dB
Image Rejection:  50 dB
 General Section
Power Consumption:  115 W
Power Supply:  AC 120 V 60 Hz or AC 220 V, 240 V 50/60 Hz
Dimensions (W x H x D):  474 x 114 x 267 mm
Weight:  6 kg (13,2 lbs)

No comments:

Post a Comment