Onkyo CP-1015A
Direct Drive Semi-Automatic Single Play Turntable with Straight-line Low Mass Tonearm, Adjustable Pitch Control and Front Panel Controls
Straight Low Mass Arm
Fully equipped for Superb Disk Tracking
Outstanding record reproduction depends on two things, stable platter rotation and precision tonearm performance. With its direct drive electronics servo controlled motor and diecast aluminum platter, you can depend on the CP-1015A to maintain accurate rotational speed characteristics. In fact, wow and flutter is a mere 0,035%.
And with the straight low mass tonearm you;ll enjoy the natural undistorted sound quality that comes from accurate grove tracing. Even with warped records, this advanced tonearm design delivers outstanding results. For real convenience you'll also appreciate such extras as front panel controls, adjustable pitch (speed) and the wide-view strobe window.
Improved Low-Range Resonance Frequency Characteristics
Compared with conventional S-shaped tonearms, Onkyo's new straight low mass arm is better designed and equipped to handle today's high-compliance cartridges. The lower effective mass of this advanced carbon fiber arm greatly improves low-range resonance frequency characteristics, substantially reducing undesirable subsonic signals in the process. Thus, reproduction is clean and clear, free from intermodulation distortion.
Features
Lightweight static-balanced straight-line tonearm
Equipped with carbon fiber headshell ADC-type connector
Direct drive DC motor with electronic servo control
Diecast aluminium platter with rubber mat
Independent pitch controls and stroboscope
Convenient auto-return and auto-cut functions
Front panel controls including up/down cueing
Direct readout tracking force and adjustable anti-skating
Triple-insulated feet and vibration damping cabinet
Removable dust cover
45 rpm single record adaptor
Specifications
Type: 2-speed automatic-return
Turntable Platter: 310 mm (12-1/4") aluminium diecast
Motor: Brushless electronic servo direct drive DC motor
Speeds: 33-1/3 and 45 rpm
Speed Control: Adjustable range ±3 %
Wow and Flutter: 0,035% WRMS
Signal-to-Noise Ratio: to dB (DIN B)
Tonearm: Lightweight straight-line static balanced pipe tonearm with detachable headshell (ADC type connector) and counterweight with direct tracking force read out
Suitable Cartrid
Weigh: 5-9 grams
Adjustable Range: 3 grams
Maximum Length: 276 mm
Effective Arm Length: 220 mm
Overhang: 14 mm
Maximum Tracking Error: +3 degrees, -1,5 degress (offset angle 21 degrees)
Cartridge Type: Tapered carbon fiber cantilever
"V" magnet type (0C - 52 V)
Frequency Response: 20 Hz - 20,000 Hz
Recommended load Impedance: 47 k Ω
Recommended Tracking Force: 2 grams
Compliance: 8 x 10¯⁶ cm/dyne
Output Voltage: 3,5 mV
Stylus Tip: 0,6 mil diamond
Replacement Stylus: DN-52st
Power Supply: AC 110 - 120, 220 - 240 V, 50/60 Hz
Power Consumption: 6 watts
Dimensions (W x H x D): 418 x 371 x 140 mm (16-1/2 x 14-1/2" x 5-1/2")
No comments:
Post a Comment