Quartz Synthesized Tuner Low Impedance Drive Discrete Amplifier
Specifications
Amplifier
Section
Power Output: 45 watts per
channel, min. RMS, at 8 Ω
, both channels driven, from
40 Hz to 20 kHz, with no more than 0,1% T.H.D.
Musical
Power Output:
2 x 130 watts at 4 Ω , 1 kHz (DIN)
2 x 80 watts at 8 Ω
, 1 kHz (DIN)
Continuous
Power Output:
2 x 70 watts at 4 Ω
, 1 kHz (DIN)
2 x 55 watts at 8 Ω , 1 kHz
(DIN)
Total
Harmonic Distortion
0,1% at 1
watt output
Intermodulation
Distortion:
0,1% at 1
watt output
Damping Factor: 35 at 8 Ω
Frequency
Response: 20 - 30,000 Hz ±1 dB
RIAA
Deviations: 20 - 20,000 Hz ±0,8 dB
Input
Sensitivity / impedance:
Phono : 2,5 mV / 50 k Ω
CD, Tape Play : 150 mV / 50 k Ω
Tape Rec : 150 mV / 3,5 k Ω (phono)
Phono
Overload: 120 mV RMS at 1 kHz, 0,1%
T.H.D.
Signal-to-Noise
Ratio:
Phono : 85 dB (at 10 mV input, A weighted); 75 dB (IHF A-202)
CD, Tape
: 95 dB (A weighted); 80 dB (IHF A-202)
Tone
Controls:
Bass :
±10 dB at 100 Hz
Treble
: ±10 dB at 10 kHz
Muting: -20 dB
Tuner
Section
FM
Tuning
Range: 87,5 - 108,0 MHz (50 kHz steps)
Usable
Sensitivity
Mono : 12,4 dBf, 2,3 µV, IHF; 1,2 µV, 75 Ω DIN
Stereo : 2,5 µV, 75 Ω
50 dB
Quieting Sensitivity
Mono : 2,2 µV, 75 Ω
Stereo : 22 µV, 75 Ω
Capture
Ratio: 1,5 dB
Image
Rejection Ratio: 85 dB
IF Rejection
Ratio: 90 dB
Signal-to-Noise
Ratio :
Mono : 70 dB
Stereo
: 65 dB
Selectivity: 50 dB DIN (±300 kHz, 40 kHz dev.)
AM
Suppression Ratio: 50 dB
Harmonic
Distortion
Mono : 0,15%
Stereo
: 0,30%
Frequency
Response: 30 - 15,000 Hz ± 1,5 dB
Stereo
Separation: 40 dB at 1 kHz; 30 dB at 100
- 10,000 Hz
Muting Level: 17,2 dBf, 2 µV, 75 Ω
Stereo Threshold: 17,2 dBf, 2 µV, 75 Ω
AM
Tuning
Range: 522 - 1611 kHz (9 kHz steps)
Usable
Sensitivity: 30 µV
Image
Rejection Ratio: 40 dB
IF Rejection
Ratio: 40 dB
Signal-to-Noise
Ratio: 40 dB
Harmonic
Distortion: 0,8%
General
Power
Requirement: 120 V, 220 V, 240 V; 50/60 Hz
Dimension (W
x H x D): 435 x 110 x 317mm (17-1/8" x 4-3/8" x
12-1/2")
Weight: 7,0 kg (15,4 lbs)
No comments:
Post a Comment