Pagine

Cambridge Alva TT turntable


Rather than go for a Belt Drive system with the ALVA TT, we opted for a medium-torque Direct Drive. Over time, the elastic used on a Belt Drive turntable can stretch and will need to be replaced. As a result of this wear, Belt Drive turntables traditionally have a less accurate playback speed than their Direct Drive cousins. This isn’t a problem on the ALVA TT – it has just 0.06% Wow and Flutter. This means a far better pitch stability – particularly during longer, more sustained musical notes.

The Alva TT uses a classic British-made one-piece tonearm. There are no joints, giving it the best possible grounding for the cartridge and offering extremely low friction.
It’s designed to retrieve the maximum amount of sonic detail from the cartridge and therefore your records.

Bluetooth aptX HD liberates your record player from the hi-fi rack. With the freedom to place Alva TT anywhere you like, your records are invited into the lime-light. Your music can be streamed from Alva TT to any Bluetooth receiver at up to 24bit/48kHz Hi-Res, which means you’re guaranteed an authentic vinyl experience, wherever it’s placed.

Specifications:
Drive Type:  Direct Drive:
Turntable Speeds:  33-1/3, 45 rpm
Motor Torque:  1.6 kg/cm
Wow & Flutter:  less than 0.1%
Turntable Platter:  POM (Polyoxymethylene)
Diameter:  305 mm
Tonearm Type:  One piece aluminium casting
Tonearm Effective Length:  238 mm
Tonearm Overhang:  17.2 mm
Tonearm Effective Mass:  11 g
Phono Stage Gain at 1 kHz:  42 dB
Phono Stage Nominal Output (with CA cartridge):  250 mV rms
Phono Stage Equivalent Input Noise (A-weighted):  0.1 µV rms
Phono Stage RIAA Curve Accuracy:  ±0.3 dB 30 Hz - 20 Hz
Phono Stage Signal/Noise Ratio (ref 1V out, 20-20K BW):  better than 90dB
Phono Stage THD+N 1kHz:  0.0025%
Phono Stage Input Impedance:  47 kΩ
Phono Stage Input Capacitance:  320 pF
Audio Outputs:  RCA line level
Cartridge Type:  High Output Moving Coil
Cartridge Frequency Response:  ±1 dB 30 Hz - 20 kHz
Cartridge Stylus:  Elliptical
Cartridge Cantilever:  Aluminium
Cartridge Output Level:  2 mV at 1 kHz
Cartridge Tracking Force:  2 g
Cartridge Recommended Load:  47 kΩ
Bluetooth:  SBC, aptX, aptX HD
Power Supply:  AC 100 - 240 V, 60/50 Hz
Power Consumption:  6W Approx, 20W max, 0.5W (Standby)
Dimensions (W x H x D):  435 x 139 x 368 mm
Weight:  11 kg

No comments:

Post a Comment