Pagine

JVC T-K100 tuner

 FM/AM Stereo Tuner
Though it lacks digital synthesizer tuning, the T-K100 is one of easiest to use tuners, and incorporates many new JVC tuner technologies; a low-noise J-FET transitor in the FM front end for high sensitivity and selectivity, and ICs wherever possible for better reliability. An extra-wide tuning dial, calibrated in linear units and softly illuminated units and softly illuminated, makes tuning easier.
Balanced AM mixer to reduce harmonic and intermodulation distortion.
 Specifications
FM Tuner Section
Tuning Range:  88 - 108 MHz
Usable Sensitivity (IHF):  10,8 dBf (0,95 µV/75 Ω)
26 dB Quieting Sensitivity (DIN):  1,2 µV/75 Ω
50 dB Quieting Sensitivity (IHF)
Mono :  17,3 dBf (2,0 µV/75 Ω)
Stereo :  38,3 dBf (22,5 µV/75 Ω)
46 dB Quieting Sensitivity (DIN)
Mono :  3,0 µV/75 Ω
Stereo :  35 µV/75 Ω
Signal-to-Noise Ratio:
Mono :  76 dB (IHF);  79 dB (DIN)
Stereo :  70 dB (IHF);  64 dB (DIN)
Total Harmonic Distortion (IHF):
Mono :  0,2%
Stereo :  0,3%
Selectivity:  60 dB ±400 kHz (IHF);  55 dB ±300 kHz (DIN)
Capture Ratio:  1,5 dB
IF Rejection:  85 dB at 98 MHz
Image Rejection:  60 dB at 98 MHz
AM Suppression:   50 dB
Frequency Response:  30 Hz - 15 kHz (+0,3 dB. -3,0 dB)
Stereo Separation:  40 dB at 1 kHz
Output Level:  600 mV (IHF);  310 mV (DIN)
Output Impedance:  3,3 k Ω
AM Tuner Section
Tuning Range
MW :  525 kHz - 1605 kHz
LW :  150 kHz - 350 kHz
Usable Sensitivity (Bar Antenna)
MW :  300 µV/m
LW :  400 µV/m
Signal-to-Noise Ratio:
MW :  50 dB
LW :  50 dB
Distortion
MW :  0,5%
LW :  0,5%
Power Supply:  110-120 V, 220-240 V AC, 50/60 Hz
Power Consumption:  9 watts
Dimensions (W x H x D):  435 x 77 x 282 mm (17-3/16" x 3-1/16" x 12-2/16")
Weight:  2,6 kg (5,7 lbs)

Nessun commento:

Posta un commento