Stereo Cassette Deck
A metal tape
compatable Dolby cassette deck with
direct cassette loading and record level indicator with an almost instantaneous
peak rise and moderate decay. An unusual feature is automatic wind past the
leader at the touch of a button. A record mute disables the input signal while the tape drives, allowing
removal of unwanted sounds while recording.
The fluorescent
bargraph record level meter is referenced to0db , representing the signal
peaks, rether than the more common 0 VU, though 0 VU is also indicated on the
indicator scale. There are selectors for Normal, CrO₂, FeCr and Metal tape bias
and equalization. Other features include; end of tape stop/disengage, optional
timer controlled start or record, reset counter, and record mute.
Controls:
Concentric-clutched
L & R record level
Ganged L & R
output level
Inputs/Outputs
Line, Microphones /
line, Headphones
Specifications
Track: 4-track; 2-channel stereo
Tape Speed: 4,8 cm/s (1=7/8 ips)
Heads: record/Playback; FH Head Erase; Double Gap
Ferrite Head
Motor: Electronically Controlled DC Motor
Wow and
Flutter: within 0,05% WRMS
Fast Wind Time: approx. 75 sec. C-60
Frequency Response
(Rec/Pb)
Normal Tape (-20 VU)
: 20 to 18,000 Hz (20 to 15,000 Hz ±3
dB)
Metal Tape (-20 VU)
: 20 to 18,000 Hz (20 to 16,000 Hz ±3
dB)
Metal (0 VU) : 20 to 13,000 Hz ±3 dB
Signal-to-Noise
Ratio:
Metal Tape (without
Dolby NR) : better than 59 bd (weighted)
Metal Tape (with
Dolby NR) : better than 69 dB (above 5
kHz)
Erasure Factor
MetalTape : more than 70 dB at 1,000 Hz
Input
Sensitivty/Impedance (0 VU, 1 kHz)
Mic : 0,3 mV/200 Ω - 5 k Ω
Line Rec : 70 mV/100 k Ω
Output Level (0 VU,
1 kHz)
Line Out (play)
: 390 mV
Phones : 65 mV/8 Ω
Bias Frequency: 85 kHz
Power Requirement
Voltage : 100, 120, 220, 240 V 50/60 Hz
Consumption : 12 W rated
Dimensions (W x H x
D): 430 x 160 x 320 mm
(16-15/16" x 6-5/16" x 12-5/8")
Weight: 6,85 kg (15,1 lbs)
No comments:
Post a Comment