An FM only stereo
tuner with phase-locked loop digital tuning and LED metering readouts. All
tuning functions are touch-controlled for no-moving-parts operation. The memory
function allows the pre-setting of five favorite stations for instant recall.
The scan search feature allows the listener to sweep up and down the dial,
stopping either at every active station or only those broadcasting in stereo
automatically. The variable muting control allows the user to set the tuner to
receive only signals of sufficient strength to assure noise-free reception. All
phases of operation are handled smoothly and facilitate the highest order of
tuning accuracy and convenience. Ther is LED
metering for multipath and signal strength variable interstation muting
control, selectable stereo de-emphasis and a multiplex filter.
Specifications
Tuning Range: 88,1 to 107,9 MHz
Antenna Inputs: 300 Ω balanced; 75 Ω unbalanced
Intermadiate
Frequency: 10,7 MHz
Sensitivity: 10,8 dBf (IHF usabla)
Quieting: 0,6 mV (75 Ω) for 30 dB mono quieting; 36 dBf for 50 dB stereo quieting; 10,8 dBf
for 50 dB mono quieting
Signal-to-Noise
Ratio:
Mono : 70 dB below 100% modulation at 65 dBf
reference level
Stereo : 65 dB below standard stereo modulation at 65
dBf reference level
Hum and Noise: 65 dB below 100% modulation at 65 dBf reference level. Minimum volume hum and
noise is 90 dB below reference
Total Harmonic
Distortion: at 1000 Hz 65 dBf 100%
modulation
Mono : 0,1%
Stereo : 0,09%
Capture Ratio: 2 dB at 65 dBf
Alternate Chanel
Selectivitty: 75 dB at 25 dBf
Frequency
Response: 30 Hz to 15 kHz ±0,5 dB
Stereo
Separation: 45 dB at 1 kHz; 35 dB aat 10
kHz
Image Response
Ratio: better than 114 dB
Spurious Response
Ratio: better than 114 dB
IF Response
Ratio: better than 114 dB both balanced
and unbalanced
RF
Intermodulation: 65 dB
AM Suppression
Ratio: better than 73 dB at 25 dBf
Subcarrier producct
Ratio: 65 dB
SCA Rejection
Ratio: 72 dB
Connectors:
300 Ω Balanced
Antenna Input - push button quicj connect
75 Ω Unbalanced
Input - F type
Composite - PIN jack
Multipath - PIN jack
Left Channel
variable and fixed output - PIN Jack
Right Channel
variable and fixed output - PIN Jack
Display: 7 segment red LED Frequency readout
Red LED Stereo
indicator
20 LED Analog dial
green dot display
10 LED Signal
Strength green bar display
10 LED Multipath
amber bar display
Power
Requirements: 120 V or 100, 200, 220,
240 V AC , 50/60 Hz
Power
Consumption: 10 watts
Dimensions (W x H x
D): 483 x 133 x 381 mm (19" x
5-1/4" x 15")
Weight: 7 kg (15,5 pounds)
No comments:
Post a Comment