Kenwood KP-1022 turntable

A high-quality turntable Frequency Response the budget-minded audiophile

The KP-1022 features a low-mass, low-friction tone arm with adjustable anti-skating to maintain precise center-of-groove tracing for greater stereo separation and optimum tracking. A full-sized, 12-inch aluminum alloy die-cast platter is isolated from residual vibration by a belt-drive coupling between the synchronous motor shaft and the turntable. The result - accurate at all speeds rotation with unaudible wow and flutter (less than 0,07%, WRMS) and Signal-to-Noise ratio of better than 45 dB.

Add to the fine engineering the unit's handsome styling, and you have a stereo turntable you can well be pround to own, at a price that fits happily into your stereo budget.

Special Mechanism:

Variable speed pause

Anti-skating device

Stylus pressure direct-readout counter

Specifications:

Turntable Type:  2- speeds Belt-drive system

Motor;  4-pole Synchronous Motor

Speeds:  33-1/3 and 45 rpm

Wow and Flutter:  less than 0,07%

Signal-to-Noise Ratio: better than 47 dB

Platter:  300 mm (12-inch) aluminum alloy die-cast

Tonearm:  Static Balance type, S-shaped pipe arm

Tracking Error:  ±1,5 °

Stylus pressure Variable Range:  0 - 4 g

Usable Cartrudge Weight:  4 - 10 g

Cartridge

Type:  Moving Magnet (V-39 MkII)

Frequency Response:  20 - 20,000 Hz

Channel Separation:  better than 25 dB (1,000 Hz)

Output:  3 mV (1,000 Hz, 50 mm/sec)

Output Balance:  1,5 dB (1,000 Hz, 50 mm/sec)

Load Impedance:  50 k Ω

Stylus pressure:  2 ±0,25 grams

Stylus:  0,5 mil diamond

Compliance:  7 x 10¯⁶ cm/dyne

Power Requirements:  120 V, 220- 240 V AC, 50/60 Hz

Power Consumption: 11 watts

Dimensions (W x H x D):  446 x 175 x 354 mm (17-9/16" x 6-7/8" x 13-15/16")

Weight:  6 kg (13,2 lbs)