Automatic Functions:
When swinging in the tone arm support - Platter starts to rotate at preselected speed
When swinging out the tone arm support - Cartridge lifts off immediately; Cartridge returns to start position; Platter stops, stylus illumination switches off
Operating
Platter Drive : Power Switch; Two tactile feedback keys for selection speeds
Carriage: Three tactile feedback keys for fast inward and outward movement as well as lifting and lowering the cartridge; built-in cartridge illumination
Specifications:
Platter Drive: Quartz- controlled direct drive system
Platter Speeds: 33 and 45 RPM
Speed Stability: ±0,01%
Speed Indications: Speed and synchro indicator (33 and 45 RPM)
Platter:
Diameter : 313 mm (12,32")
Weight : 2,1 kg (4 lbs 10 oz)
Acceleration Time: less than 2 sec. to 33 RPM
Deceleration Time: less than 2 sec. from 45 to 33 RPM
Wow and Flutter:
Weighted : better than 0,05%
Linear : better than 0,1%
Rumble (Unweighted): better than -48 dB (DIN 45539A)
Rumble (Unweigted with 20 Hz high-pass): better than -50 dB (DIN 45539A)
Rumble (Weighted): better than -70 dB (DIN 45539B)
Tone-arm:
Linear-tracking tone arm with servoelectronic follow-up control
Tangential Tracking Error: smaller than 0,5°
Skating Compensation: Not required with a tangentially tracking system
Stylus Force: Adjustable with balance weight from 8 to 20 mN (0,8 to 2 p)
Tone-arm Lowering: Elecrtonically controlled, pneumatically damped
Muting: Electronic muting until stylus contacts record
Tone-arm Follow-up: Optoelectronic sensing with LED as light source; servoelectronics an DC motor
Run-out Switch: Automatically activated by servoelectronics
General
Semiconductors Components: 21 ICs, 19 Transistors; 29 Diodes; 4 LEDs; 2 Bridge rectifiers
Power Requirements: 100/110/120 V 200/220/240 V ; 50/60 Hz
Power Consumption: 30 W max
Power Fuse
0,4 A (slow-blow) : 100 - 120 V
0,2 A (slow-blow) : 200 - 240 V
Dimensions (W x H x D): 449 x 142 x 395 mm (17,7" x 5,5" x 15,6")
Weight: 9,1 kg (20 lbs)
No comments:
Post a Comment