From Akai new sound in cassettes
Akai gives you the most perfect cassette recording in the world today.
That's a mighty big claim. But we can prove it. Our GXC-65D Stereo Cassette Recorder is innovatively engineered with ADRS. This exclusive system eliminates almost all high frequency distortion above 8,000 Hz.
But we didn't stop there.
We combined ADRS with Dolby, and then added Akai's exclusive GX (Glass and Crystal ferrite) head.
The clear, undistorted signal is a pleasure to behold. And a greater pleasure to hear. What's more, the GXC-65 D is equipped with Akai's Invert-O-Matic - automatically reverses the cassette inside the recorder for continuous repeat/reverse. And the Invert-O-Matic mechanism is unconditionally guaranteed for two years - parts and labor.
So you can stop sitting around waiting for perfect cassette recording. Listen to the GXC-65D - your ears will make up your mind for you.
Illustrated below are the actual output curves of 13,000 Hz signal from a Dolby equipped cassette deck without ADRS, and a comparable curve from the new Akai GXC-65D.
Specifications
Track System: 4-track, 2-channel stereo system
Tape Speed: 1-78 ips ±2%
Wow and Flutter: less than 0,12% RMS
Frequency Response:
Chrom Tape : 30 to 18,000 Hz
LN Tape : 30 to 16,000 Hz
Signal-to-Noise Ratio: better than 58 dB with Dolby
Distortion: less than 2% at 1,000 Hz "0" VU recording
Crosstalk: better than 25 dB
Erase Ratio: better than 70 dB
Bias Frequency: 61 ±3 kHz
Bias Leak: less than -50 VU
Outputs:
Line : 0 ±1,5 dB (0,775 V) using a 333 Hz pre-recorded tape
DIN : 0,4 V
Phone : 30 mV at 8 Ω
Speaker : 6 W each channel at 8 Ω
Inputs:
Mic : more than 0,4 mV / 4,7 k Ω
Line : more than 50 mV/ 200 k Ω
DIN : more than 7 mV (low), 70 mV (high)
Recording Capacity: 1 h stereo recording using C-60 cassette tape
F.Fwd and Rwd Time : 68 sec (C-60)
Heads:
Recording/Playback: P4-330, 4-track, 2-channel GX rec/playback head
Gap / Impedance : 1,4 - 1,9 microns/1,200 Ω ±20% at 1 kHz
Erase Head : E4-150, 1-track, 1-channel erase head
Gap /Impedance : 0,3 mm / 195 Ω ±10% at 100 kHz
Motor: Hysteresis Synchronous Outer-roter motor
Typ : HM-12CS
Revolutions : 1,500 / 1,800 rpm at 50/60 Hz
Power Supply: 100 to 240 V AC 50/60 Hz
Power Consumption: 50 W (recorder type), 20 W (deck type)
Dimensions (W x H x D): 415 x 180 x 290 mm (16,6" x 7,2" x 11,6")
Weight: 9,2 kg (20,2 lbs)
No comments:
Post a Comment