FM/AM Stereo Tuner
Fully Electronic Digital Synthesizer Ensures Best Tuning
The digital synthesizer enables optimum tuning in accordance with the frequency of different FM/AM (LW) stations in increments of 50 kHz for FM reception and 9 kHz for AM reception.
This system servo-controls the veractor diode by comparing the frequency received with an accurate reference frequency obtained by a crystal oscillator, and thereby cuts frequency drift and ensures stable reception.
Automatic Accurate Tuning
Set the Scanning key to Auto and push the Up (for Down) tuning key, and the higher (or lower) frequency radio wave is automatically searched for the correct tuning point. Depressing the tuning key again causes the adjacent station to be pinpointed.
One-Touch Precise Tuning to Any of 14 Stations
Once the desired station is selected, it can be stored in memory merely by pushing the Memory key and the associated Preset key (1-7). Thus, up to 14 stations (FM/AM) can be stored in memory. Depressing the desired Preset key pinpoints the station selected.
Sophisticated Circuit Configuration
At the front end, a 4-stage varactor diode comparable to a 4-gang variable capacitor and an MOS FET are used to form a solid input circuit, attaining high sensitivity and outstanding Signal-to-Noise Ratio. At the same time, image interference is appreciably removed. The intermediate frequency amplifier stage, which largely determines the total sound quality, employs a linear-phase ceramic filter featuring both low distortion and high selectivity, thereby improving the overall distortion throughout the band.
The detector circuit employs a quadrature detector IC having linear detection capability in a wide band. Also, the MPX circuit for FM detector uses a newly developed PLL-MPX IC boasting low distortion and high Signal-to-Noise Ratio, providing excellent stereo separation.
DC Configuration Amplifier for Audio Circuit up to Output Stage.
To transmit high-quality, distortion-free musical signals, a DC configuration amplifier eliminating the coupling capacitor is used to obtain optimum frequency characteristics.
Specifications
FM Section
Tuning Frequency Range: 87,5 - 108 MHz
Usable Sensitivity: 1,8 µV (10,2 dBf, 300 Ω )
Effective Selectivity: 80 dB (±400 kHz)
Signal-to-Noise Ratio (50 dB Sensitivity)
Stereo : 31,6 µV (35,2 dBf)
Mono : 3,0 µV (14,2 dBf)
Total Harmonic Distortion
Stereo : 0,08% (90% mod.)
Mono : 0,06% (100% mod.)
Capture Ratio: 1,0 dB
AM Suppression: 60 dB
Image Rejection: 50 dB
IF Rejection: 65 dB
Frequency Response: 20 Hz - 15 kHz +0,2 dB -1,5 dB
Stereo Separation: 55 dB (1 kHz)
AM Section
Tuning Frequency Range: 530 - 1620 kHz (USA); 622 - 1611 kHz (EU)
Usable Sensitivity: 18 µV
Total Harmonic Distortion: 0,6%
Signal-to-Noise Ratio: 50 dB
LW
Section
tuning Frequency Range: 140 - 353 kHz
Usable Sensitivity: 40 µV
Effective Selectivity: 50 dB
Signal-to-Noise Ratio: 50 dB
General
Power Requirements: AC 120V 60 Hz, or AC 220/240V 50/60 Hz
Power Consumption: 6 W
Dimensions (W x H x D): 434 x 66 x 300 mm
Weight: 3,1 kg
No comments:
Post a Comment