Auto-reverse cassette deck
Dual's first cassette deck, the 901, incorporates every refinement you would expect of an audio component made by Dual; the precision engineering; the clean, understated design, and the quality of materials and German craftsmanship.
It also the first precision cassette deck to incorporate the convenience of automatic revers, continuous playback and bi-directional recording. Significantly, it is the first time Dual's high level of performance and reliability has been available to cassette tape recording.
The 901's automatic reverse-system makes it possible to play both sides of a cassette without turning it over. Continuous-play additionally permits a cassette to repeat until the machine is shut off. Recording can be bi-directional.
A photoelectric monitor actuates reversal and shuts off without drag or friction in the tape.
The 901's drive system is unique; using the time-tested Dual Continuous-Pole synchronous motor, it has separate, precision-ground belts to drive the capstan and take-up preventing tape tension variations from affecting tape speed.
The ballistically-damped VU meters of the 901 are typical of its electronic refinements. They are engineered to the exact standards specified for professional equipment.
Optimum usage of the Dolby noise reduction system is assured by a built-in test oscillator which permits precise adjustment to the magnetic characteristics of different tape types.
Other features of the 901 include:
Automatic Level Control as well as a Peak level Indicator to augment the VU meters.
Specifications
Tape Speed: 4,76 cm/s
Deviation from Correct Speed: less than 1%
Wow and Flutter:
DiN 45 507 : less than 0,12%
WRMS : less than 0,09%
Frequency Response;
Standard Tape : 30 - 14,000 Hz
CrO₂ tape : 30 - 16,000 Hz
Dynamic Range
IEC A-Curve : better than 51 dB
Dolny NR : better than 60 dB
Distortion (Ref. To 0 dB VU at 333 Hz): less than 2%
Oscillator : 85 kHz, Push-pull Oscillator
Erasure: better than 70 dB
Channel Separation:
Between Directions : better than 60 dB
Between Stereo Channels : better than 30 dB
Inputs
Mic : 0,22 mV
Radio : 0,22 mV (DIN)
RCA : 0,65 mV
Outputs:
Radio : 0,75 V (DIN)
RCA : 0,75 V
Fast Winding Time: 60 sec for C 60 cassette
Semiconductors: 4 ICs; 3 FET; 31 Transistors; 38 Diodes
Power Requirements: 110 - 130 V or 220 - 240 V, AC 50/60 Hz
Power Consumption: approx 60 Watts
Dimensions (W x H x D): 420 x 122 x 281 mm
Weight: 6,5 kg
No comments:
Post a Comment