The Genesis 201 loudspeaker system was created for those discriminating music lovers who know no compromises. This state of the art. System is designed to reproduce music at live listening levels with virtually no restrictions on dynamic range, frequency response or imaging capabilities.
The Genesis 201 is a floor standing four-piece loudspeaker system featuring a pair of dipole midrange/tweeter panel consists of a 48-inch midrange ribbon, twelve front-firing and three rear-firing 1-inch planar ribbon tweeters. Each woofer tower contains eight cast-frame, metal-cone woofers driven by an 800-watt remote controlled Servo Amplifier. All the transducers in this unique, state-of-the-art. System have been designed to be a nearly perfect piston within its useable frequency band.
The 1-inch planar ribbon tweeter described by the audiophile press as possibly "the world's best", is hand-crafted from an 0,0005inch thick laminated membrane of aluminum and Kapton. The extremely low mass of the tweeter's diaphragm means that this driver has a frequency response considerably beyond the human hearing range.
Genesis 201's midrange transducer is single-piece, planar ribbon driver constructed of a very thin layer of aluminum laminated to a 0,001 inch thick Mylar substrate and surrounded by over 24 feet of barium ferrite magnets.
An active 1600-watt servo feedback system, employing accelerometers as sensors, lowers the woofer distortion by a factor of 10 compared to its open loop response. This results in the 201 low frequency system having lower distortion and laster response time than conventional designs.
Specifications
Frequency Response: 16 Hz - 36,000 Hz ±3 dB
Sensitivity: 90 dB at 1 watt/1 meter
Maximum/Minimum Tube Power: 500/70 watts per side
Maximum/Minimum Solid State Power: 750/70 watts per side.
Input Impedance: 4 Ω (nominal)
HF Transducers (per Side): fifteen Genesis 1" Ribbon Tweeters
Midrange Transducer (per Side): 48" Genesis Ribbon
LF Trasducers (per Side): eight 8" cast-frame metal-cone woofers
Amplifier Controls: Phase, Gain, Low-pas, High-pass
Speaker Controls: Rear Tweeters (±1 dB); Upper Midrange Contour (±0,75 dB)
LF Amplifier Power Rating: 4 x 400 watts RMS
Amplifier Inputs: Stereo XLR (balanced), Stereo RCA
Amplifier Input Impedance: 33 k Ω
Dimesnions (H x W x D):
Mid/Tweeter Panel : 72" x 13,5" x 9,75"
Woofer Tower : 72" x 11" x 22"
Amplifier : 10" x 12" x 19"
Weight
Mid/Tweeter & Woofer Tower : 295 kg (650 lbs)
Amplifier : 32 kg (70 lbs)
Finish: Rosewood
No comments:
Post a Comment