Myryad MI-120 amplifier

The Myryad MI 120 Stereo Integrated Amplifier has been designed to offer a combination of high quality sound reproduction and elegant styling.

The amplifier can accept up to six line-level input sources, including two tape recorders. Outputs are provided for one pair of loudspeakers and for headphones. All functions – input selection, volume and standby – can be operated using the infra-red remote control handset.

The MI 120 offers a range of expansion possibilities:

- The AUX. input can be converted to accept the output from a phono cartridge by installing a Myryad Phono Cartridge

Pre-Amp Module.

- A low-level “Bi-amp” output is provided to feed the Myryad MA 120 Power Amplifier, allowing bi-amplified drive of suitable loudspeakers.

- The “My-Link” input/output can be coupled to other Myryad products which can then be remote-controlled via the MI 120’s infra-red receiver.

 

Specifications

Continuous Rated Power Output (at 8 Ω):  60 W (Min. power per channel, 2 0Hz – 20 kHz, both channels, <0.05% THD)

Rated Distortion (THD 20Hz – 20kHz):  <0.05%

Dynamic Power IHF

At 8 Ω :  80 W

At 4 Ω :  120 W

At 2 Ω :  160 W

Slew Rate:  >60 V/μsec

Damping Factor (ref. 8 Ω, 50 Hz):  >100

THD, SMPTE I.M. and IHF I.M:  <0.05%

Line Level Inputs (Tape 1, Tape 2, CD, Video, Tuner, AUX)

Input Impedance (R and C): 10 kΩ/420 pF

Input Sensitivity (ref. 60 watts):  250 mV

Maximum Input Signal:  .>10 V

Signal-to-Noise Ratio A-weighted (ref. 60W):  >104 dB

Signal-to-Noise Ratio A-weighted (ref. 1W):  >86 dB

Frequency Response : 20 Hz  –  20 kHz +0/-0.3 dB

Line Level Outputs

Bi-amp Output Impedance:  450 Ω

Output Level:  775 mV

Tape Output Impedance:  2 kΩ + source impedance

Power Requirements

Voltage (set by internal wiring):  120/230 V

Physical Specification

Dimensions (W x H x D):  436 x 95 x 303 mm

Weight, Net:  8.75 kg