Features
4-position Tape Select Switches allow kinds of tape, including the new Metal Tape, to be used
An SA erase head with high erase efficiency is used so that Metal Tape can be erased
ANRS which lowers tape hiss noise so that it is inaudible and Super ANRS which improves linearity at high frequencies are incorporated
5-point peak indicators are for easier and more accurate checking of peak levels.
Timer standby capability for automatic start of recording or playback using an AC timer
With the REC MUTE switch, you leave silent passages between program material
Output level control possible
Automatic input selector
Geared and oil-damped cassette holder
Large VU meters with backlight
Specifications
Type: Stereo Cassette Deck
Track System: 4-track, 2-channel
Tape Speed: 1-7/8 inch/sec (4,8 cm/sec)
Frequency Response:
Metal Tape : 30 - 12 500 Hz ±3 dB (0 VU); 20 - 18 000 Hz (-20 VU)
SA/CrO₂ Tape : 30 - 8000 Hz ±3 dB (0 VU); 20 - 18 000 Hz (-20 VU)
Signal-to-Noise Ratio : 60 dB (from peak level, weighted, Metal tape)
The Signal-to-Noise Ratio is improved by 5 dB at 1 kHz and by 10 dB above 5 kHz with ANRS on (DIN 45 500 weighted)
Effect of Super ANRS (Normal tape)
Improvement of SN: the same as with ANRS
Improvement of Frequency Response :
0 VU recording : 6 dB at 10 Hz
+5 VU recording : 12 dB at 10 kHz
Improvement of Distortion:
0 VU recording : 3% or less at 10 kHz
+5 VU recording : 3% or less at 10 kHz
Wow and Flutter: 0,055% (WRMS): 0,15% (DIN 45 500)
Crosstalk: 65 dB (1 kHz)
Total Harmonic Distortion : K3; 0,4%; T.H.D. 1,0% (metal tape, 1 kHz 0 VU)
Bias : AC bias (85 kHz)
Erasure : AC erasure (85 kHz)
Heads :
Rec/Playback : Sen Alloy Head
Erasure : Sen Alloy Head
Motor: Electronic Governor DC motor
Fast Forward Time: 80 sec with C-60 cassette
Rewind Time : 80 sec. With C-60 cassette
Semiconductors: 5 ICs , 21 Transistors, 31 Diodes, ! SCR
Input Terminals Sensitivity/Impedance
Mic Jack x 2 : 0.2 mV (-72 dBs)
Matching Impedance : 600 Ω - 10 k Ω
Input Jack x 2
Min. Input Level : 80 mV (-20 dBs)
Input Impedance : 100 k Ω
Output Terminals
Output Jack x 2
Output Level : 0 - 300 mV
Output Impedance : 5 k Ω
Matching Impedance: 50 k Ω or more
Headphone Jack x 1
Output Level : 0,3 mW/8 Ω
Matching Impedance: 8 Ω - 1k Ω
Power Requirements: AC 100/120/200/240 V, 50/60 Hz
Power Consumption: 12 W
Dimensions (W x H x D): 420 x 149 x 262 mm (16-9/16" x 5-7/8" x x 10-5/16")
Weight: 5,2 kg (11,4 lbs)
No comments:
Post a Comment