Double Capstan Drive Cassette Stereo Tape Deck
Professional Wow&Flutter characteristics with closed loop double capstan drive system
The employment of the refined tape drive system of this model is usually limited to a few professional type open reel models. However, Akai decided to include this feature in a discriminating number of our cassette models for matchless cassette performance when combined with the other quality mechanisms incorporated in these models.
With this system, the recording/playback head is positioned in the center between two capstan and pinch rollers. This not only results in better head-to-tape contact, but also provides constant tape tension and the section of the tape between capstans is kept free of vibrating interference which may occur outside of the closed area during tape travel.
Functioning integrally with this system is an anti-vibration hysteresis synchronous motor for reduced wow and flutter, modulation interference, and tape speed variation as well as two unusually stout flywheels and flat belts for capstan drive. (When compared with the usual flywheel and V belt system, wow and flutter is small, but rotating energy is increased). Further, the revolutions detector for automatic stop is an electro-magnetic system control lead switch so that the load applied to the reel table is small for even better wow and flutter characteristics.
Thus, these features result in incomparable tape travel stability and constant tape tension and speed with an amazing wow and flutter specification of 0,07% WRMS
Like all Akai cassette machines, the GXC310D features the Dolby Noise Reduction System to reduce tape hiss to a virtually inaudible level, give a bigger frequency response Akai's ADR (Automatic Distortion reduction) system which varies the equalisation at high input levels to cut distortion and extend the dynamic range at high frequencies,
Its many other features include a peak Level indiator Automatic Stop Limiter switch, Mic/Line Input Selector for a wider dynamic margin and less noise. Pause Control, output Level Control for perfect matching with any amplifier input, Tape Run indicator, Memory Rewind and Index Counter direct function change controls and a bias equalisation switch for low noise, CrO₂ or ferrichrome tape.
Again, there's a specially designed perspex dust cover (DC310) as an optional extra.
Specifications
Track System: 4 track, 2 channel stereo
Tape Speed: 1-7/8 ips
Wow and Flutter: less than 0,007% WRMS
Frequency Response:
Low Noise Tape : 30 to 14,000 Hz ±3 dB
CrO₂ Tape : 30 to 16,000 Hz ±3 dB
Fe-Capture Ratio Tape : 30 to 17,000 Hz ±3 dB
Distortion: less than 1,5% (1,000 Hz "0" VU)
Signal-to-Noise Ratio: better than 50 dB (with Dolby up to 60 dB) above 5 kHz
Bias Frequency: 100 kHz
Erase Ratio: better than 70 dB
Heads:GX Recording/playback and Erase head
Motor: 4-pole hysteresis synchronous outer-rotor motor
Fast Forward and Rewind Time: 75 sec. C-60 cassette tape
Output Jacks:
Line : 0,775 V ("0" VU). Required load impedance; more than 10 k Ω
Phone : 30 mV/8 Ω
Input Jacks:
Microphone : 0,3 mV/5 k Ω
Line : 60 mV/100 k Ω
DIN jack :
Output : 0,4 V
Input : 2 mV
Dimensions (W x H x D): 440 x 142 x 300 mm (17,3 x 5,6 x 11,8 inch)
Weight: 8,6 kg (18,9 lbs)
No comments:
Post a Comment