3-Head Microcomputer-controlled Tape Tuning System Stereo Cassette Deck
Features
Silent operation with smooth operational feel
Wide scale 2-color FL peak meter with automatic peak hold previsions
A microcomputer-controlled tape tuning system, automatically tunes itself for the optimal recording characteristics
A cam-servo motor with a microcomputer control rotary encode checking system
Improved tape tension servo sensor mechanism, much more stable tape head contact and tape travel
Computer Tuning (CTS)
This tuning system automatically sets the equalizer and recording sensitivity, both of which are important to maximizing the performance of various tapes and to make high quality recordings, the tuning time is only 5 seconds; recording chances are not missed. When the cassette is loaded, the auto tape selector sets the deck to the standard optimum condition. Strictly speaking, however, the recording sensitivity and frequency characteristics of the tapes vary, depending on its type.
The computer tuning system allows the maximum performance of the tape to be heard and at the same time ideally corrects the frequency characteristics to a flat and wide range characteristic.
Specifications
Type: Vertical tape loading 4-track 2-channel stereo cassette tape deck
Heads:
1 x SF Record/Playback combination head
1 x Double gap ferrite Erase head
Motors
For capstan : 1 x FG servo DD motor for
For Real Winding : 1 x DC motor
Tape Speed: 4,8 cm/sec
Fast Forward /Rewind Time" approx. 90 sec. C-60 cassette tape
Recording Bias: approx. 105 kHz
Signal-to-Noise Ratio Overal (at 3% T.H.D. level): Dolby C ON more than 73 dB (CCIR/ARM)
Frequency Response Overal (at -20 dB Metal tape) : 25 - 21,000 Hz ±3 dB
Frequency Range (at -20 dB Metal tape): 20 - 23,000 Hz
Channel Separation: better than 40 dB (at 1 kHz)
Crosstalk: better than 65 dB (at 1 kHz)
Woa and Flutter: less than 0,027% WRMS
Input
Microphone : 0,35 mV (-67 dB) with input level control at maximum
Input Impedance : 10 k Ω unbalanced
Line : 77,5 mV with input level control at maximum
Input Impedance : 50 k Ω unbalanced
Output
Line : 775 mV (0 dB) with output level control at maximum (with 10 k Ω load, recorded level of 200 Pwb.mm)
Headphone : 1,2 mW with output level control at maximum (optimum load impedance 8 Ω to 2 k Ω )
Accessories : Parallel PIN cord x 2, cleaning stick set x 1
Power Requirements: AC 110, 120, 220 - 240 V, 50/60 Hz
Power Consumption: 22 W
Dimensions (W x H x D): 434 x 115 x 286 mm
Weight: 5,7 kg
No comments:
Post a Comment