Professional Stereo Tape Recorder
The X360 provides you Professional Results in its operation because of these exclusive Akai features:
Magnetic Brake
3-Speed Motor for Capstan Drive
Cross-Fzield Head
Automatic Volume Control (Comput-O-Matic)
Automatic Dust Minder
Automatic Continuous Reverse (Reverse-O-Matic)
Sensing Tape Reverse
4-track stereo/monaural recording/playback
4 speeds; 15; 7-1/2; 3-3/4 and 1-7/8 ips
3 Motors - Hysteresis synchronous 3-speed motor for capstan drive. Two G-pole eddy current out-rotor motors for supply and take up reel drive
4 Heads - Erase; Playback; Record and Biass heads
50 W Solid state amplifier
Shield type head for high Signal-to-Noise Ratio
Tape shifter in fast forward and rewind operation
Electrical track selection
Automatic Stop, Automatic Shut-off
Automatic pinch wheel release
100 KC biased for recording of FM multiplex
4-digit index counter with reset button
Bass and treble controls
VU meters, Tape cleaner
Stereo headphone jack
DIN jack (with selector for High/Low input
AC outlet
Finely oil-finished wooden cabinet
Vertical and horizontal operation
Specifications
Tape Speed: 1-7/8; 3-3/4; 7-1/2; 15 ips
Wow and Flutter
7-1/2 ips : less than 0,04% RMS
3-3/4 ips : less than 0,07% RMS
1-7/8 ips : less than 0,16% RMS
Frequency Response: 30 to 18,000 ps at 3-3/4 ips
Distortion: within 1,5% 1,000 cps 0VU at 7-1/2 ips
Signal-to-Noise Ratio: better than 50 dB
Input Level:
Microphone : more than 0,5 mV
Line : more than 50 mV
DIN : more than 5 mV ( LOW), 50 mV (high)
Power Output:
20 W maximum per each channel at Undistorted Power, total 40 W
25 W maximum per each channel at Music Power , total 50 W
Equalization: Correct equalization for playback of tapes recorded to the NARTO curve
Recording Bias Frequency: 100 KC
Recording Level Indicator: VU meter x 2
Recording System: 4-track stereo/monaural, crossfield bias system
Fast Forward and Rewind Time: 75 sec using 1,200 feet tape at 50 cycles; 60 sec at 60 cycles
Head: 4 heads for Erase, Playback and record and bias
Motor: 3 motors
For capstan drive - Hysteresis synchronous 3-speed motor
For supply and take-up reel drive - Two 6-pole eddy current out rotor motors
Speaker: 2 x 5" speaker
Transistors: 60
Power Requirements: AC 100 - 240 V 50/60 Hz
Power Consumption: 70 - 200 VA
Dimensions (W x H x D): 406 x 444 x 254 mm (16" x 17,5" x 10")
Weight: 28 kg (61,6 lbs)
No comments:
Post a Comment