Transcription Turntable
The new leak 2001 transcription turntable incorporates a unique spherodynamic method of isolating against external shock vibration and acoustic feedback. Small jolts which can damage an expensive record are eliminated.
The turntable itself is belt driven and its speed does not vary by more than 0,1% even when using a record cleaning device.
The synchronous 10 pole motor with a ferrite rotor ensures accuracy of speed even with changes in supply voltage and loading.
The precision engineered pick-up arm accommodates all cartridges with standard 127 mm mounting centres and has adjustable bias setting and adjustment for minimum tracking error with any cartridge.
Specifications
Turntable:
Speeds: 33-⅓ and 45 rpm
Speed Accuracy: ±0,5%
Wow (Typical) : 0,08%
Flutter (Typical) : 0,02%
Rumble (Typical) : -65db (DIN B)
Platter Diameter : 320 mm
Platter Weight : 1,6 kg
Suspension: Unique spherodynamic system comprising; dynamically balanced turntable and pickup assembly; independently mounted on three highly flexible spheres, each containing special viscous damping fluid. Natural resonance frequency below 4 Hz
Motor : 10 pole synchronous, 600 rpm at 50 Hz
Transmission: Belt drive to turntable rim. Precision ground belt.
Pickup Arm
Type : Static balanced professional, precision engineered
Total Length : 323 mm
Effective Length: 240 mm
Dynamic Balancing: By counter weight stylus pressure adjustable 0-3 grams, direct reading
Anti Skating: By bias weight and thread adjustable for 0 to 3 grams stylus pressure.
Bearings:
Vertical : Angular contact
Lateral : two sets large size radial ball bearings
Bearing Pivot:
Friction : 18 mgm avarage, lateral and vertical
Leads : 1,2 meters, 4 wire and earth DIN plug connection . Lead capacitance typical 108 pf per channel
Pickup Lift/Lower : Remote controlled, viscous damped
Plug in Headshell: Lightweight metal headshell suitable for all cartridges with international 12,7 mm fixings
Tracking Error: With correct setting of stylus. 0°at inside diameter (2,375" radius) 1,5° at outside diameter (5,760" radius)
Tracking Angle: Head offset 21°30'
Overhang: Stylus tip from centre spindle 15 mm
Dimensions (W x H x D): 494 x 170 x 391 mm
Weight: 12,7 kg
Finish: Teak
No comments:
Post a Comment