AM/FM Stereo Receiver
Add a high performance, high-sensitivity tuner to advanced PLL MPX circuitry, then add a high-power, low-distortion power amplifier to all the other RX-602 features, and what does it all add up to. An experience in sound that you'll not only want to have around to set the pace of your living room enjoyment, but one you'll also find hard to resist because the price makes the professional quality so readily accessible.
A high-performance, high-sensitivity tuner
For truly fantastic sound enjoyment, the high-performance,, high-sensitivity tuner Rotel engineers for the RX-602 gives you super high sensitivity, excellent rejection characteristics, and distortion so low it's negligible. For a big boost in selectivity along with fasting reliability, ceramic filters and advanced integrated circuitry go snugly into the FM IF section.
The Power Amp
It's high-power, low-distortion all the way. With split power supply and 100% directly coupled OCL circuitry (OCL circuitry has low-noise silicon transistors that give 40W/40W continuous music power into 8 ohms at less than 0,5% T.H.D. both channel driven - or 35W/35W RMS continuous power into 8 ohms at less than 0,5% T.H.D. both channel driven from 20 to 30,000 Hz). If that's not superb output, you tell us what is.
Advanced NF and IC equalizer amp
Advanced because of the advanced electronics - low-distortion , 2-stage directly coupled NF (Negative Feedback) circuitry with high-voltage integrated circuitry achieve genuinely outstanding RIAA characteristics. For terrifically transparent reproduction quality, tone control circuitry also features directly coupled negative feedback circuitry.
FM and Audio Muting
FM muting effectively removes inter-station noise during tuning. Audio muting instantly lowers the volume level by -20 dB without disturbing the volume setting when temporary lowering of volume is necessary.
Extra-wide Linear FM dial scale and large tuning
The extra width of the linear FM Dial scale results in easy , precise tuning. The size of the vernier scale makes it easy to see. Large tuning meters complement this ease all the more with smooth flywheel action knob that get you right-on to a station quickly.
PLL MPX section
Utilization of PLL (Phase Loock Loop) integrated circuitry and other improved circuitry in the MPX section allows for effective stereo esparation and excellent frequency response. Distortion never gets in the way of stereo enjoyment.
The performance and the advanced electronics that make RX-602 enjoyment possible are enclosed in a cabinet that stands out in any system; hair-line brushed extruded aluminum front with luxury metal knobs. Cabinet itself has a beautiful simulated walnut finish. This long, lean look is human-engineered up, down, and all-around to be a great looker and an equally great performer.
Specifications
Amplifier Section
Music Power Output (IHF) : 170 W (4 Ω )
Continuous Power Output (RMS, each Channel Driven) : 60 W / 60 W (4 Ω ); 45 W / 45 W (8 Ω )
Continuous Power Output (RMS, both Channels Driven) : 48 W / 48 W (4 Ω ); 40 W / 40 W (8 Ω ); 35 W / 35 W (8 Ω , from 20 to 20,000 Hz at less than 0,5% T.H.D.)
Harmonic Distortion: less than 0,1% (32 W/32 W RMS)
Intermodulation DIstortion : less than 0,15% (32 W/32 W RMS)
Power Bandwidth (IHF): 5 to 50,000 Hz (8 Ω )
Frequency Response: 10 to 100,000 Hz ±3 dB
Damping Factor: 40 (8 Ω , 1 kHz)
Input Sensitivity/Impedance:
Main IN : 820 mV/ 33 k Ω
Tape Monitor : 130 mV / 50 k Ω
Aux 1, 2 : 130 mV / 60 k Ω
Phono 1, 2 : 2,5 mV / 60 k Ω
Tape Output Level: 300 mV/ 3 k Ω
Phono Overaload: 130 mV (1 kHz)
Phono Equalization: RIAA standard ±0,5 dB
Controls
Bass : ±10 dB at 100 Hz
Treble : ±10 dB at 10 kHz
Loudness Contour: ±8 dB/100 Hz +4 dB/10 kHz
Crosstalk: 50 dB / 10 kHz
Hum and Noise (Continuous Power Output)
Phono : 65 dB
Tape : 80 dB, Residual 0,5 mV
Speaker Impedance: 4 to 16 ohms
FM Tuner Section
Frequency Range: 88 to 108 MHz
Sensitivity (IHF): 1,8 microvolts
Signal-to-Noise Ratio : 67 dB
Harmonic Distortion: 0,2%
Selectivity: 70 dB ±400 kHz
Capture Ratio: 1,5 dB
Stereo Separation: 40 dB at 100 Hz, 40 dB at 1 kHz, 35 dB at 10 kHz
IF Rejection: 100 dB
Image Rejection: 80 dB
Spurious Response Rejection: 100 dB
SCA Suppression: 70 dB
AM Suppression: 55 dB
AM Tuner Section
Frequency Range: 525 to 1650 kHz
Sensitivity: 20 microvolts
Selectivity: 30 dB
IF Rejection: 50 dB
Image Rejection: 50 dB
General
Power Requirements: Ac 100, 120, 220, 240 V, 50/60 Hz
Power Consumption: 200 max
Dimensions (W x D x H): 22-1/2" x 13" x 5-3/8"
Weight: 10 kg (22 lbs)
No comments:
Post a Comment