SAE's dedication to excellence in quality construction and innovative designs pervades all factes of the manufacturing process. Every unit is handcrafted in SAE's new environmentally controlled plant. All circuit boards, amplifier power transformers, and metal work are manufactured at the SAE facility. Features common to all SAE units include; 5% deposited-carbon resistors; military-grade glass-epoxy circuit boards; computer grade capacitors; high-grain iron-ore laminations in all power transformers, and durable, precisely machined chassis fabricated on the premises.
Dynamic Transducer
The Mark X is a three-way system utilizing four drivers. The major characteristics of this transducer are exceptionally wide frequency response and excellent dispersion. Low frequencies are generated by a 12" driver with a specially treated cone utilizing a half-roll foam surround. Extended cone excursion enables the Mark X to reproduce signals as low as 18 Hz - an astonishing accomplishment from a small enclosore.
Mid-frequencies are reproduced by a 5" driver in its own air-tight enclosure.
High frequencies are propagated from two 2-1/2" tweeters. One of the tweeters radiates from the rear producing desirable reflected sound. High and mid-frequency controls can be adjusted to render the system completely flexible to compensate for room acoustics.
The Mark X system is completely fuse-protected.
Specifications
Power Requirements: minimum 20 Watts RMS
Power Handling: Greater than 200 Watts RMS musical peaks. Completely fuse-protected against excessive current input.
Nominal Impedance: 8 Ω
Rear Radiation: 50% above 1440 Hz
Crossover Frequencies
High Frequency Driver : 1440 Hz at 6 dB/octave
Mid Frequency Drivers : 240 Hz at 6 dB/octave
Low Frequency Drivers : 480 Hz at 6 dB/octave
Controls
High Frequency Level : Continuously adjustable from -7 dB at +5 dB
Mid Frequency Level : Continuously adjustable from -16 dB to +4 dB
Dimensions (H x W x D): 635 x 368 x 305 mm (25" x 14-1/2" x 12")
Weight: 22,23 kg (49 pounds) each
Finish: Hand rubbed oiled walnut
Base: Model B-10 (optional)
No comments:
Post a Comment