Features:
2-channel FM/AM/FM stereo receiver
IC power output section
FET FM front end
MFR tone control with switch-selected hinge points
Specifications
Tuner Section
FM Tuning Range: 88 - 108 MHz
Sensitivity: 2,5 µV 300 Ω (IHF)
Capture Ratio: 2 dB (IHF)
Selectivity: 60 dB
Image Rejection: 50 dB
IF Rejection: 80 dB
Spurious Rejection: 40 dB
FM Stereo Separation: 35 dB
SCA Rejection: 50 dB
Antenna Terminals: 300 Ω / 75 Ω
AM Tuning Range: 530 - 1605 kHz
Sensitivity: 20 µV (IHF)
Image Rejection: 35 dB
IF Rejection: 30 dB
Antenna: Ferrite core antenna, external antenna terminals
Audio Section
Power Output (each channel driven, Total):
Music Power (IHF) at 0,8% distortion : 30 W (4 Ω ); 37 W (8 Ω ); 20 W (16 Ω )
Continuous Power at 0,8% distortion : 22 W (4 Ω ); 30 W (8 Ω ); 17 W (16 Ω )
Frequency Response: 20 - 40,000 Hz -3 dB
Power Bandwidth: 20 - 40,000 Hz (IHF, 0,8%)
Signal-to-Noise Ratio
Phono : 65 dB
Aux : 75 dB
Input Sensitivity/Impedance (for rated output)
Phono : 3,0 mV/47 k Ω
Aux : 200 mV/100 k Ω
Tape : 200 mV/100 k Ω
Hum
Phono : 50 mV
Aux : 10 mV
Damping Factor: 26 at 8 hm
Tone Controls:
Bass : ±10 dB at 100 Hz
Treble : ±10 dB at 10 kHz
Loudness: +10 dB at 100 Hz
Residual Noise: 0,8 mV at 8 Ω
General Section
Controls: Volume, bass, treble, balance, selector AM/FM-mono / FM-auto / Phono / Aux
Connector : Phono; Aux, inputs (phono jack); tape input and output via PIN jacks and parallel, single-connection 5-pin DIN jack; screw terminals for main speakers plus screw terminals for extension speakers; headphone jack; unswitched AC outlet; 300 Ω and 75 Ω FM antenna connection; input and output for 4-channel adaptor
Indicator: FM-ST indicator, FM/AM tuning meter
Semiconductors: 5 ICs; 1 FET, 7 Transistors; 10 Diodes
Power Requirements: AC 100/120/220/240 V, 50/60 Hz
Cabinet: Walnut finished wood cabinet
Dimensions (W x H x D): 420 x 125 x 285 mm (16-1/2" x 4-7/8" x 11-1/4")
Weight: 8,2 kg (18 lbs)
No comments:
Post a Comment