Pagine

Kenwood KR-6340 receiver

Kenwood Two-Four Receiver

This receiver in the new Kenwood "Two-Four" line gives you: firstly, it functions as a high-grade stereo receiver with 80 watts of RMS power (152 watts total IHF music power); secondly, it decodes regular matrix (RM sources with accurate four-channel separation); thirdly, its SQ decoder circuit permits 4-channel play of SQ Matrix records; and , last but not least, it accepts a little plug-in CD-4 demodulator - our model KCD-2 - for playing discrete 4-channel CD-4 records. So, whatever the situation in regard to record availability in your area may be, whatever personal listening preferences you may have, whether you want to go 4-channel right now or wait a little longer, the KR-6340 is tailor-made to your needs.

Coming from Kenwood, the KR-6340 boasts the kind of careful, guaranteed engineering that's exemplified by DSD FM stereo decoding, unconditionally guaranteed output power at any frequency, and fully electronic protection against short-circuits and overload. All told, a two-channel/four-channel receiver that continues a great tradition of Kenwood high fidelity.

 


Four-channel capabilities

Built-in Separate SQ and RM Matrix Decoders

Prepared for FM Discrete 4-channel Broadcasts

Accepts Plug-in CD-4 Demodulator

Recording and playback 4-channel Tape and Aux Connectors, and 4-channel headphone jakcs

Drivers a Total of Eight Speakers

 

Amplifier section capabilities

BTL Amplifier Layout Gives 250% Power in 2-channel mode

Power Guaranteed Unconditionally at Any Frequency

Fully Electronic Protection Circuit

AM/FM Stereo Tuner Capabilities

FET and Ceramic Filters in FM Tuner

Exclusive Kenwood DSD System

Other Features
Program Indicator Lamps

Convenient 4-channel Balance Controls

 


Specifications

FM Tuner Section

Usable Sensitivity (IHF):  2,0 µV

Frequency Response:  20 Hz - 15,000 ±1,2 dB

Total Harmonic Distortion

Mono :  0,5% (at 400 Hz 100% modulation)

Stereo :  0,8% *at 400 Hz 100% modulation)

Signal-to-Noise Ratio:  63 dB at 1 mV input

Image Rejection:  60 dB

Selectivity (IHF ALT channel):  50 dB

IF Rejection:  90 dB

Spurious Signal Rejection:  90 dB

AM Suppression:  60 dB

Capture Ratio:  3,0 dB

Stereo Separation:  40 dB (at 1,000 Hz); 20 dB (at 10,000 Hz)

Subcarrier Suppression:  45 dB

Antenna Impedance:  300  (balanced); 75  (unbalanced)

AM Tuner Section

Usable Sensitivity (IHF):  25 µV

Signal-to-Noise Ratio:  45 dB at 1 mV input

Image Rejection:  45 dB

Selectivity (IHF):  30 dB

IF Rejection:  35 dB

Antenna:  Built-in ferrite bar antenna

Main Amplifier Section

RMS Power Output Full Channel Driven into:

8  at 20-20,000 Hz  :  2 x 40 watts (2-ch); 4 x 15 watts (4-ch)

8  at 1,000 Hz  :  2 x 50 watts (2-ch); 4 x 20 watts (4-ch)

4  at 10,000 Hz  :  2 x 45 watts (2-ch); 4 x 23 watts (4-ch)

Dynamic Power Output

Into 8  :  170 watts (2-ch); 120 watts (4-ch)

Into 4  :  152 watta (4-ch)

Total Harmonic Distortion

At Rated Power into 8  :  0,8%

At -3 dB Rated Power into 8  at 1,000 Hz :  0,3%

Intermodulation Distortion (60 Hz : 7 kHz = 4 : 1)

At Rated Power into 8  :  0,8%

At -3 dB Rated Power into 8 :  0,3%

Power Bandwidth:  20 Hz - 40,000 Hz

Damping Factor:  20 at 8  (4-ch)

Speaker Impedance:  4ohm - 16

Pre-Amplifier Section

Input Sensitivity/Impedance

Phono :  1,5 mV/100 k

AUX :  150 mV/50 k

Tape Play :  150 mV/50 k

Maximum Input Voltage (RMS)

Phono 1 :  100 mV (T.H.D. 0,8% at 1,000 Hz)

Signal-to-Noise Ratio

Phono :  60 dB

AUX :  75 dB

Tape Play :  75 dB

Output Voltage/Impedance

Tape Rec (PIN) :  150 mV/100

Tape (DIN) :  40 mV/50

Frequency Response

Phono 1, 2 :  RIAA Standard curve ±1 dB

Tuner, AUX, Tape Play :  20 - 20,000 Hz ±1 dB

Tone Controls

Bass :  ±10 dB at 100 Hz

Treble ±10 dB at 10,000 Hz

Loudness Control (-30 dB) :  +10 dB at 100 Hz ; +5 dB at 10,000 Hz

General

Switches

Speaker Selector :  A, B Push Switch

Input Selector :  AM; FM; Phono; CD-4; AUX

Mode:  Mono; 2-CH; RM; SQ; Discrete

Tape Monitor:  Push Switch

Others:  Loudness, AMP Control, Muting

AC Outlet:  1 unswitched

Power Consumption:  320 watt at full power; 35 watt at no signal

Dimensions (W x H x D):  500 x 153 x 360 mm (19-11/16" x 6-⅓2" x 14-5/32")

Weight:  15 kg (33 lbs)


 

No comments:

Post a Comment