PERFORMANCE,
UNLIMITED PERFORMANCE IS A DESIGN REQUIREMENT AT MclNTOSH
Low distortion is a
requirement For high performance in a preamplifier. A typical wave form
analysis of the C 26 at 2,5 volts output is a 99.95% perfect reproduction of
the input wave, 20 Hz through 20,000 Hz!
Performance is
important to your listening expectations. With a Mclntosh you are assured of
highest performance because Mclntosh guarantees performance. Your C 26 must be
capable of meeting its advertised specifications or your purchase price will be
refunded. Mclntosh promises performance and delivers performance.
RELIABILITY IS A
DESIGN REQUIREMENT AT MclNTOSH
Endless hours are
invested by our engineers carefully and thoroughly testing and retesting
individual component parts. These hours are required to provide you with the
highest degree of reliability that modern design and manufacturing can produce.
Only because of this exhaustive program can Mclntosh guarantee you complete
freedom from service costs tor the first THREE YEARS that you own your C 26,
LONG LIFE IS A
DESIGN REQUIREMENT AT MclNTOSH
Exhaustive testing
and evaluation of each component part makes your C 26 the best value. As an
example- the front panel is constructed of materials that are nearly
indestructible! The combination of anodized aluminum and glass are impervious
to attacks by acids and oils. The subtle beauty of the C 26 will remain
unblemished year, after year, after year. This attention to detail increases
the value of a Mclntosh at trade in time.
FLEXIBILITY IS A
DESIGN REQUIREMENT AT MclNTOSH
Careful attention to
customer needs, attention to changes in customer use, and constant
experimentation in new methods makes the Mclntosh C 26 preamplifier the most
responsive to customer needs. Control of
remote loudspeaker and main system loudspeakers from the preamplifier is a
Mclntosh innovation.
With the C 26 you
can record on one or two tape recorders, monitor either one or record from one
tape recorder to another! A front panel headphone jack for low impedance
headphones allows the enjoyment of programs in total privacy-
Stepped tone
controls, separate in each channel permits the accurate repeatability of
settings for any program source. The Mclntosh developed concentric switches
give maximum flexibility in each channel without unnecessary clutter and
complication.
Continuously
variable loudness compensation allows the exact amount of compensation to suit
your taste at any loudness level. Add high frequency and low frequency filters,
a six-position input selector, seven-position mode selector, center channel
level control, phase control and a balance control that does not affect the
total loudness in the listening room and you have the useful flexibility
Mclntosh has designed in the C 26. Added to these values is the complete
protection from all service cost for three full years and you know why the
Mclntosh C 26 is the best value in a solid state preamplifier, anywhere.
Only Mclntosh offers
a free THREE YEAR SERVICE CONTRACT with each piece of equipment!
You can't pay us to
service your C 26 for the first three years you own it. Both parts and labor
are included in the contract.
FACILITIES
BASS CONTROLS: 11 position concentric switches, separate
controls for each channel, —20 dB to +16 dB at 20 Hz
TREBLE
CONTROLS: 11 position concentric
switches, separate controls for each channel, ±20 dB at 20,000 Hz
LOUDNESS; Flat response, or continuously variable
loudness equalization as volume level is reduced.
BALANCE: When program material is out of balance,
rotation of this co
VOLUME CONTROL;
Precision "tracked" at all listening levels for true stereo balance.
The AC ON/OFF switch is coupled with the volume control.
TAPE MONITOR SWITCH:
Two switches, two position mechanically interlocked.
AC OUTLETS: 1 unswitched (Red), 4 switched
LF FILTER: Flat, or roll-off below 50 Hz, 6 dB per
octave, down 12 dB at 20 Hz
HF FILTER: Flat, or roll-off above 5kHz, 6 dB per
octave, down 12 dB at 20,000 Hz
SPEAKER SWITCH:
MAIN—Switch the MAIN
Loudspeaker ON or OFF without affecting the performance of REMOTE speakers.
REMOTE—Switch the
REMOTE loudspeaker ON or OFF without affecting the performance of the MAIN
speakers.
INPUT SELECTOR: 6 positions AUX (auxiliary or spare), TAPE 2,
TAPE 1, TUNER, PHONO 1, and PHONO 2
MODE SELECTOR: 7 positions: LEFT only to both speakers,
RIGHT only to both speakers, STEREO REVERSE, STEREO, MONO, MONO to Left speaker
only, MONO to Right speaker only.
HEADPHONES: For low
impedance stereo headphones.
SECONDARY CONTROLS
CENTER CHANNEL LEVEL
Top of chassis control to adjust the output level of the left plus right
program material at the CENTER CHANNEL output on the back panel.
PHASE CONTROL: Electronically reverse phase in the left
channel to correct "out of phase" program sources.
TRANSISTOR
COMPLIMENT: 10 Silicon-planar
transistors, 3 diodes
POWER
REQUIREMENT: 117/125 volts, 50/60 Hz, 12
watts
MOUNTING: Mclntosh developed professional PAN-LOC
ELECTRICAL
SPECIFICATIONS
FREQUENCY
RESPONSE: 20 Hz to 20,000 Hz, +0 -0,5 dB
DISTORTION: Less
than 0.1% at 2.5 volts output, 20 Hz to 20,000 Hz
INPUT SENSITIVITY
AND IMPEDANCE:
Phono
1 and Phono 2 : 2 millivolts at 47,000 Ω for 2.5 volts output.
Aux,
Tape 1, Tape 2, Tuner : .25 volts at 250,000 Ω for 2.5 volts output.
HUM AND NOISE:
Phono 1 and Phono 2
: 74 dB below 10 millivolt input, equivalent to less than 2 microvolts at the
input terminals.
Aux, Tape 1, Tape 2,
Tuner : 85 dB below rated output.
OUTPUT:
Main : 2.5 volts
with rated Input. Up to 10 volts can be developed without distortion.
Tape : 2.5 volts
with rated input.
Phono : input signal
of 10 millivolts produces 1.2 volts output.
Center Channel (L I
R) : 2.5 volts. A level control adjusts the Center Channel output from -6 dB to
+6 dB with respect to MAIN output.
OUTPUT IMPEDANCE:
Main : 2,000 ohms,
designed to operate into 47,000 ohms or more
Tape Output : About
200 ohms, designed to operate into 47,000 ohms or more
Center Channel (L +
R) : About 1,200 ohms, designed to operate into 47,000 ohms or more
MECHANICAL
SPECIFICATIONS
DIMENSIONS:
Front panel :
16" wide by 57/16" high;
Chassis : 15"
wide by 5" high by 13" deep, including PAN-LOC shelf and bach panel
connectors;
Knob
Clearance—1½" in front of mounting panel
WEIGHT: 18 pounds net, 28 pounds in shipping carton
FINISH: Front Panel—Anodized goId and black with
special gold/teal panel nomenclature illumination
CHASSIS: Chrome and black
.jpg)
