Tandberg TA 300

 Features Tandberg TA 300

Specifications better than DIN standard 45500

RIAA equalized preamp for magnetic pickup

High- and Low-cut filters

Loudness compensation added to volume control

Inputs for 2 record players and 2 tape machines (tape/monitor function)

Front jacks for 2 stereo headphones

Front input/output for extra tape machine on the TA 300

Microphone amplifier and mixing capability on the TA 300M

Specifications

Nominal Power Output (0,3% THD at 1kHz, DIN):

2 x 35 Watts RMS into 4 Ω

2 x 25 Watts RMS into 8 Ω

Music Power Output:  2 x 50 Watts into 4 Ω

Harmonic Distortion (power output 1 dB below nominal value and lower):

0,2% at 4 Ω

0,15% at 8 Ω

Intermodulation Distortion:  0,4% (in output  stage at 8 Ω)

Damping Factor:  30 at 4 Ω; 60 at 8 Ω

Power Bandwidth:

15 - 50,000 Hz into 4 Ω

10 - 80,000 Hz into 8 Ω

Frequency response:  15 - 50,000 Hz (-1,5 dB with linear inputs)

Treble Control:  ±17 dB at 10,000 Hz

Loudness:  +12 dB at 10,000 hz

Bass Control:  ±15 dB at 50 Hz

Loudness:  +12 dB at 50 Hz

Low-cut Filter:  -3 dB at 70 Hz (-12 dB/octave)

High-cut Filter:  -3 dB at 7000 Hz (-12 dB/octave)

Channel Separation:

Phono 1 and 2 ; 60 dB

Tape 1 and 2 : 60 dB

Tuner : 65 dB

Signal/Noise-and-Hum (reference 50 mW, nominal input signal, peak values):

Phono 1 and 2 : 55 dB

Tape 1 and 2 : 83 dB

Tuner : 60 dB

Signal/Noise-and-Hum (reference max. power output and nominal signal input) :

Phono 1 and 2 : 60 dB

Tape 1 and 2 : 83 dB

Tuner : 79 dB

Sensitivity (nominal power output at 1 kHz into 4 Ω)

Phono 1 and 2 : 2,5 mV

Tape 1 and 2 : 75 mV

Tuner : 60 mV

Power requirements:  Selector for 115/220/240 V Ac, 50 or 60 Hz

Power Consumption: 10 - 180 Watts

Dimensions (W x H x D):  430 x 87 x 243 mm (16-7/8" x 3-7/16" x 9-5/8")

Weight:  5 kg (11 lbs)