Tandberg TR 200

Features Tandberg TR 200

Specifications better than DIN standard 45500

Pre-selection of up to 6 FM stations.

Interstation noise muting

Pre-amplifier for record players with magnetic pickup

Front jack for stereo headphones

FM Tuner

The Tandberg FM Stereo receiver TR-200 is provided with a sophisticated FM tuner that permits pre-selection of up to 6 FM stations. Black dial remains dark until power is turned on, then lights up in crisp contrast to provide pleasant, easy tuning. Muting effectively suppresses interstation noise during tuning. Available with decoder for stereo FM reception.

Stereo Power Amplifier

High power output (2 x 20 Watts RMS and 2 x 30 Watts music power). RIAA equalized pre-amplifier for record player with magnetic pickup. Loudness compensation switch. Inputs for rocord player, tape deck and an extra program source, thus providing a wide versatility. The TR-200 is ideal as the hub of your Tandberg high fidelity stereo system.  TR-200 is housed in a stylish cabinet available in walnut, teak, rosewood or oak.

Specifications

Nominal Power Output (1% THD at 1 kHz, DIN):

2 x 20 Watts RMS into 4 Ω

2 x 15 Watts RMS into 8 Ω

Music Power:  2 x 30 Watts into 4 Ω

Harmonic Distortion:  0,25% at power output 1 dB below nominal value and lower

Intermodulation Distortion:  1%

Damping Factor: 15 at 4 Ω; 30 at 8 Ω

Power Bandwidth:  20 - 35,000 Hz (DIN)

Frequency Response:  20 - 40,000 Hz (linear inputs, DIN)

Treble Control:  +14 dB, -15 dB at 10,000 Hz

Loudness:  =3,5 dB at 10,000 Hz

Bass Control:  +16 dB, -16 dB at 50 Hz

Loudness:  +11 dB at 50 Hz

Channel Separation:  43 dB at 1000 Hz (DIN)

Signal/Noise Ratio (DIN, reference 50 mW at nominal input signal, peak value):

Tape : 52 dB

Extra : 52 dB

Phono  Magnetic and Ceramic: 52 dB

Sensitivity (nominal power output at 1 kHz):

Tape : 250mV

Extra : 100 mV

Phono Magnetic : 2,3 mV

Phono Ceramic : 70 mV

FM Section

Frequency Band:  87,5 - 108 MHz

Sensitivity at 26 dB S/N, DIN:

1 µV at 75 Ω;

2 µV at 300 Ω

Sensitivity at 30 dB S/N , IHF:

2 µV at 300 Ω

Signal/Noise Ratio (at 1 mV antenna voltage):

61 dB : Unweighted DIN

70 dB : Weighted DIN

68 dB : Unweighted IHF

Harmonic Distortion:

0,5% DIN;  1% IHF

IF Rejection:  100 dB IHF

Image Frequency rejection: 70 dB IHF

IF Bandwidth:  210 kHz (6 dB)

Limiting (-3 dB):  3 µV at 75 Ω

Muting Thereshold:  5 µV at 75 Ω

Capture Ratio: 1,8 dB

General

Power Requirements:  Selector for 115/220/240 V AC, either 50 or 60 Hz

Power Consumption:  15 - 100 Watts

Dimensions (W x  H x D):  430 x 87 x 243 mm (16-7/8" x 3-7/16" x 9-5/8")

Weight:  5 kg  (11lbs)