Kenwood DP-880 SG

CD player with Digital Output

Features:

Coaxial digital output

Twin high-speed ladder network DACs with Digital Pulse Axis Control

4-times oversampling digital filter

3-pole Butterworth analogue lowpass filter

Totally separate digital/analogue circuits and power supplies

Multi-insulation system

Optimum Servo Control type III

3-beam laser pick-up

High-rigidity structure

Double oversampling digital filter

10-key input for direct track ccess

20-track random programme memory

Memory repeat

5-mode real-time display

Full-function infra-red remote control

Rapid direct play system with +10 -+50 keys and 10-key input

4-play mode: Track, program, Time, Single

Remote/main output level control

T.H.D. :  0,003%

Dynamic Range:  95 dB

Specifications:

Type: Compact Disc player

Read System:  Non-contact optical pickup

Laser:  GaAIAs. Wave-lenght =780 nm.  3-beam tracking

Rotational Speed:  about 500 to 200 rpm

Error Correction:  Cross Interleave Read-Solomon code

Audio Channels:  2 -stereo channels

Frequency Response:  4 Hz - 20 kHz

Signal-to-Noise Ratio:  more than 100 dB

Total Harmonic Distortion:  0,003% at 1 kHz

Channel Separation:  more than 100 dB at 1 kHz

Wow and Flutter:  bellow measurable limit

Analog Output Voltage:

Line Out Fixed :  2,0  V

Line Out Variable :  0 - 2,0 V

Line Digital Output:

Coax Cable Terminal :  0,5 V p-p, 75 Ω

Headphone Jack:  60 mW (8 Ω)

Power Requirement:  110 - 220 V 50/60 Hz

Power Consumption: 23 W

Dimensions (W x H x D):  440 x 104 x 313

Weight:  5,4 kg

Wireless Remoe Control :  RC-P880 SG

Luxman D-102

 The D-102 brings the listener the highest levels of musical performance along with a logical design that takes full advantage of the convenience and flexibility offered by digital technology.

In addition to Luxman's array of advanced digital and analog technological features, the D-102 features a highly stable three-section power supply, in which the servo DAC and analog circuits all have separate regulated and filtered power sections. This provides stable noise-free output and superior musical dynamics.

The D-102 also utilizes the latest microprocessor technology to provide the ultimate in flexibility and operational simplicity.

Up to 15 tracks can be preset into the computer's memory for playback in any sequence.

 A 10-key remote control offers complete control over all major functions. In addition to basic operational commands, it allows remote opening and closing of the disc door, direct random entry and play of any track on the disc, operation of the Time Select Switch and programming functions.

An eight-digit fluorescent display presents simultaneous operations information of the track number and time functions; either track or total disc elapsed time, or entire disc remaining time.

The remote controlunit RD-102 includes a ten-key numeric keypad for direct random track entry and play.

A ten-numeric keypad allows you to directly enter the track of your choice for instant playback, and permits advanced memory programming functions. In addition, the program Check feature provides an instant status report of memory contents.

In addition to direct track entry, the D-102 also allows you to skin forward or backward in one-track increments, or use two scanning speeds in fast Forward or backward to search within individual music selections.

Naturally, thorugh the Repeat feature, you can enjoy continual playback of a single selection, the entire disck or a programmed sequence of selections.

Specifications

Type:  Compact Disc player with optical pickup

Quantization:  16 bitlinear

Channels:  2 stereo channels

Frequency Response:  20 Hz - 20 kHz ±0,5 dB

Dynamic Range:  over 90 dB

Total Harmonic Distrotion:  0,005% (1 kHz)

Channel Separation:  over 36 dB

Wow and Flutter:  unmeasurable

Output:  2 volts

Pickup:  semiconductor laser

Track Search:  by track number

Power Supply:  120 V, 220 V 50/60 Hz

Power Consumption:  14 watts

Dimensions (W x H x D):  438 x 82 x 309 mm

Weight:  4,4 kg

Accessories:  RD-102 remote control

Sansui SP-200

 Creative Speaker Design Based on Repeated Hearing Tests as Well as on Laboratory Test

Speaker performance may be well measured by laboratory instrumentation. But "live" sound must be proved by human ears or hearing test. Thus, Sansui's speaker system is designed on the basis of a wide variety of data obtained from repeated actual test as well as from laboratory tests. These tests have been made not only in our modern laboratory  and test rooms made of different construction materials. That's why Sansui's SP series system can reproduce lifelike stereo sound wherever it may be installed.

3-way 5-speaker system

The SP-200 is a full range 3-way 5-speaker system consisting of a 12-inch woofer, two 5-inch midrange speakers and two 2-inch horn type tweeters. It can faithfully reproduce deep, rich lows, and clean, transparent highs, and all the tones in between.

Woofer - Designed to match the "pipe-ducted" bass reflex type enclosure. Its edge, paper cone, damper and other components are all designed to give the best linearity even at any big amplitudes, assuring good damping characteristic at low frequencies. Equipped with specially designed level control.

Midrange - It is  often said that the quality of midrange determines the value of a speaker system. Generally many speaker systems tend to neglect the midrange, giving too much care to hig and low frequency ranges. The Sp-200 is provided with two 5" rear-sealed hgih-performance midranges whose powerful magnetic circuit prevents any interference with the woofer. They can reproduce a live sound of strongly attacked percussion instruments as if they were played just before you.

Tweeters - the clear, clean, transparent highs are a measure of a performance of a speaker system. The SP-200 posesses two horn type speakers whose frequency response is more than 20,000 Hz  and whose transient response is excelent, too. You can enjoy romantic mood of strings as it is.

 Faithful Reproduction of Bass Tones by Pipe-Ducted Bass Reflex

The Sansui's exclusice "pipe-ducted" bass reflex enclosure helps reproduce original bass tones faithfully. The bass sounds that are boomy or exaggerated in a limited bass range never deserve the name of Hi-Fi. In order to match the pipe-duct characteristics, the woofer is designed to lower "f₀" greatly by the cross edge, assuring the faithfull reproduction of the lowest

Transformer Type 12 dB Crossover Network

Here's the Sansui's exclusive knowhow of the transformer. The transformer type network is designed to let each of woofer, midranges and tweeters function in its most suitable frequency range, assuring clear sound even at the crossover points.

Specially Designed Level Control

The Sansui's exclusive transformer-type crossover network changed the level control from the conventional volume-type attenuator to the latest tap-type control whose operation does not influence the damping characteristics at all. This level control has three positions to adjust clear, natural and soft. The "natural" position is for the average rooms; "clear" for the rooms where the highs are swallowed up and the lows are exaggerated and "soft" for rooms where the lows are swallowed up and the highs are  exaggerated.

 25 mm Thick Glass Wool Used as Sound Absorbment

25 mm thick glass wool with the highest sound absorbing coefficient possible prevents the standing wave from occuring in the enclosure. As a result, the mutual interference of the speakers is completely eliminated.

Beautifully Finished Walnut Enclosure

The enclosure is meda of high-density tip boards of 21 mm in thickness and beautifully finished in walnut. Due to its structural design and select materials it has unsurpassed durability.

Deluxe hand-Carved Speaker Grill

The speaker grill is a fruit of an exquisite combination of Japanese traditional craftsmanship and European elegant color and design. It will enhance the beauty of your living room. What's more, it helps produce better quality of sounds.

Interference-Free Positioning of Speaker

Although the installation of two or more speakers in one box often leads to the mutualinterference between them, the Sp series system splved such a problem through years of our researches on the positioning of the speakers.

Specifications SP-200

Speakers:

Low Frequency : 12" cone woofer

Mid Frequency :  two 5" cone type midrange

High Frequency :  two 2" horn type tweeters

Maximum Input:  40 watts

Input Impedance:  8 Ω

Frequency Response:  35 - 20,000 Hz

Crossover:  1,500 Hz and 5,000 Hz

Dimensions (H x W x D):  25-3/4" x 15-1/8" x 12-1/2"

Weight:  40,6 lbs

Sansui SP-100

 Both of these handsome speaker systems are already estabilished favorites among discriminating stereo enthusiasts worldwide. As quality 3-way systems, they are designed for pure, uncompromised high fidelity stereo reproduction when used in medium to large powered stereo systems. SP-200 feature specially designed woofers, midrange and tweeters, that have been carefully positioned to take maximum advantage of Sansui's pipe-duct reflex enclosure.

25 watt input capacity - with a 25 watt handling capacity, the SP-100 is at home in any quality medium-to-high powered stereo system. It brings a new degree of quality to any system in which it is used.

 Three-way, 3-speaker system -  utilizing three main types of speakers, the SP-100 is at home throughout the entire audio range, from a low 45 Hz, all the way to 20,000 Hz which is well beyond the limits of human hearing.

Woofer - this quality component has been designed to take maximum advanteg of Sansui's pipe-duct bass reflex design. Its edge, paper cone, damper and other pats are all designed to deliver the best possible linearity at the highest amplitudes.

Midrange - these rear-sealed cone type speakers provide more depth to the system's overall sound reproduction qualities. They enable the listener to distinguishbetween any independent instrument in an orchestra. It is often said thet the quality of midrange reproduction determiniesthe quality of speaker system.

Tweeter - two horn type tweeters enable the SP-2000 to deliver clean, transparent highs all the way up to 20,000 Hz with excellent transient response. 

 Other Features:

Unique Sansui pipe-duct bass reflex enclosure

Transformer type 12 dB crossover network

Level control

Sound absorbent material

Fine furniture enclosure

Fretwork grille

Specifications SP-200

Speakers:

Low Frequency : 12" cone woofer

Mid Frequency :  two 5" cone type midrange

High Frequency :  two 2" horn type tweeters

Maximum Input:  40 watts

Input Impedance:  8 Ω

Frequency Response:  35 - 20,000 Hz

Crossover:  1,500 Hz and 5,000 Hz

Dimensions (H x W x D):  25-3/4" x 15-1/8" x 12-1/2"

Weight:  40,6 lbs

Rotel RA-1412

Specifications

Continuous Power Output:

110 watts per channel (min. RMS, both channels driven  into 8 Ω from 20 to 20,000 Hz with no more than 0,1% THD)

Total Harmonic Distortion:  0,1% (max. at rated power output from 20 to 20,000 Hz ID))

IM Distortion:  0,3% (1 kHz at rated power output, -1dB)

Frequency Response:  3 - 100,000 Hz(±1 dB at 1 watt per channel)

Input Sensitivity/Impedance:  980 mV/33 kΩ

Damping Factor:  80 (±10 %)

Speaker Impedance: 

4 to 16 ohms (A, B  or C)

8 to 16 ohms (A + B, A + C, B + C)

Pre -amplifier  Section:

Output Voltage/Impedance:  980 mV/100 Ω, 2 V max.

Harmonic Distortion:  Less than 0,08% at rated output voltage

Frequency Response:  3 to 50,000 Hz, ±1 dB

Signal-to-Noise Ratio:

Phono 1 & 2, Mic : more than 75 dB (IHF "A" network closed circuit)

Tape, Tuner, Aux 1 & 2 : more than 95 dB (IHF "A" network closed circuit)

Residual Noise: Less than 1 mV

Input Sensitivity/Impedance:

Phono 1 &2 : 2, 4, 8 mV/25, 50, 100 kΩ (adjustable)

Tape, Tuner, Aux 1 & 2 : 150 mV/50 kΩ

Mic : 2,5 mV/50 kΩ

Output level

Tape Out (RCA Jack) : 350 mv/3,3 kΩ

Tape Out (DIN) : 120 mV/90 kΩ

Phono Overload:  More than 300 mV at 0,1% THD

Phono Equalization (RIAA Standard):   ±0.2 dB

Tone Controls Bass at 100 Hz :

±10 dB (400 Hz turnover);

±7 dB (200 Hz turnover)

Tone Control Treble at  10 kHz :

±7 dB (5 kHz turnover);

±10 dB (2,5 kHz turnover)

Filters:

High:  12 dB/oct at 8 kHz, 12 kHz

 Low:  12 dB/oct.  at 30 Hz, 15 Hz (subsonic)

Subsonic Fiter: 15 Hz

Loudness Control:

+20 dB at 50 Hz/+6 dB at 10 Hz ;

+10 dB at 50 Hz/+3 dB at 10 kHz (2-position)

Audio Muting:  -10 dB,  -20 dB (2-position)

Crosstalk: 50 dB overall

General Info

Semiconductors Used:  62 Transistors;  1 ICs;  28 Diodes

Power Consumption:  850 watts max.

Dimensions (W x H x D):  540 x 180 x 430 mm

Weight:  22 kg (48.4 lbs) net

Sansui 1000A

 The latest power tubes and push-pull output amplifier combine to give the 1000A a distortionless output up to 80 watts and maximum music power of 100 watts. The head amplifier utilizes a transistor circuit for a gain three times larger and a S/N ratio far superior to conventional tube-type amplifiers. Power bandwidth range is from 20 to 20,000 Hz and the distortion factor a low 1% at 1khz. A two-stage noise limiter, muting circuit, advanced switching matrix and  stereo indicator help to put the 1000A into the studio class of stereo equipment.

Features:

The 7591 power tubes operate in class AB, Push-pull )fixed bias) for high fidelity reproduction. Their combined maximum out put is limited to 100 Watts. Total harmonic distortion at 1 kHz is 0,8%,and even at very low frequency where it is extremely difficult to minimize harmonic distortion, the distortion is limited to not more than 1%. This is quite a feat for a 100 watts amplifier.

Another remarkable feature is the damping factor of 9,5, a figure which is lower than that of triode power tubes coupled in P.P.. This is way bass sounds come out with such clarity.

New 7591 P.P. produces 80 W without distortion

NFB used in all amplifier circuits, from pre-amplifier to power amplifier. The low distortion of the power amplifier is meaninglass if the pre-amplifier generates distortion. This 1000A uses a three-stage  amplifier circuit in its intermediate or control amplifier - unlike conventional one-stage control amplifiers - and has all its circuits in a single negative-feedback loop. These make 1000A free from noise and distortion.

Super precision transistor pre-amplifier eliminates hum and noise.

The exclusive Sansui four-transistor pre-amplifier, which features a transistor circuit factor of 4-as compared with conventional 5 dB, eliminates hum and noise, the enemy of high-fidelity reproduction. The amplifier has a much netter S/N ratio and a gain three times larger than vacuum tube amplifer.

 Highly sensitive two-stage RF amplifier using two Nuvistors a three gang variable condenser.

The 1000A has an extremely compact high gain RF amplifier for FM, which uses two cascode-coupled, low noise Nuvistor tubes with a three-gang variable condenser.

Therefore the tuner outperforms conventional single-stage grounded grid RF amplifiers by 10 dB in amplification and assures stable, high-selectivity, high-fidelity reception.

Double-limiter shuts out noise.

The 1000A is equipped with a two-stage noise limiter, which works effectively even where the field intensity is weak. It reliably eliminates a wide variety of noise such as annoying ignition sounds and other interferences.

Muting switch supresses noise during channel selection.

Unlike conventional EM receivers, which produce loud noise in the absence of input because their limiters require a certain level of input voltage to perform their noise-limiting function, the 1000A produces no noise even when not tuned to any station. This is because it has a built-in "Muting switch" (squelch circuit) which disconnects the audio amplifier stage automatically when tuner input drops below a certain level.

Three-dimension performance possible with center-channel output terminal.

The 1000A has an output terminal for the center-channel amplifier. Connect it to a monaural amplifier, and enjoy a three-dimansion effect.

Each channel can be operated independ ently (equipped with double-knob conrol)

Each channel has an independent tone control for bass and treble. This makes fine adjustment possible.

 Equipped with advanced high-performance accessory circuits.

This amplifier is equipped with various advanced accessory circuits such as loudness control, low and high filters, tape monitor, presence, and headphone jack.

Amazing channel separation of 35 dB and more ensured by advanced FM multiplex circuit. The adoption of the most advanced switching matrix method for the multiplex circuit has amazingly improved the performance of the 1000A. The amplifier has a full-fledged AFC, which can be switched off if you like.

The  AFC enables you to enjoy a stabilized reception of FM broadcast for many hours once you have  tuned in.

Easy-to-see FM multiplex stereo indicator

The FM multiplex stereo indicator actuated helps you tune in FM stereo stations easily and reliably.

Single-stsge RF amplifier with three-gang vaiable condenser for AM

The addition of a single-stage RF amplifier to the AM tuner has improved its sensitivity remarkably. This makes it particulary useful for DX reception.

Moreover, it has such an excellent image ratio that no beat is produced between your ststion and another neighboring station.

Built-in, high-sensitivity ferrite antenna

The built-in, high-sensitivity ferrite antenna adds to your listening pleasure by reducing noise to less than that of conventional tuners.

Specifications:

Audio Section

Music Power Output:  100 watts total

RMS Music Power:  40 + 40 watts

Harmonic Distortion:  1% at 1 kHz at RMS rated power

Frequency Response:  20 - 20,000 Hz ±1 dB (Over-all)

Frequency Power Amp Section:  10 - 80,000 Hz ±1 dB

Hum and Noise (IHFM):

High Level Input :  90 dB below rated output

Low Level Input :  70 dB below rated output

Channel Separation:  55 dB at 1 kHz (phono)

Input Sensitivity (rated output):

Phono 1 :  0,5 mV (by using extra matching transformers)

Phono 2 :  1,5 mV

Tape Head (NAB) :  1,5 mV

Mic :  1,8 mV

Aux 1 :  65 mV

Aux 2 :  110 mV

Damping Factor:  9,5 at 16 Ω, 1 kHz

Output Impedance:  8 - 16 Ω

Controls and Switches:

Bass Control :  26 dB total variation at 50 Hz

Treble Control :  21 dB total variation at 10 kHz

Loudness Control:  50 Hz + 7,5 dB; 10 kHz + 7,5 dB

Volume Control at -30 dB

Low Filter:  -10 dB at 50 Hz

High Filter:  -11 dB at 10 kHz

Presence Switch:  6 dB 50 Hz

Mode Selector Switch:

Stereo Rev;  Stereo Nor;  Mono L;  Mono R;  mono L + R

Other Special Features:

Direct Tape Monitor, Headphone Jack, Center-channel output for connection to a third amplifier, DIN Connector

FM Section

Frequency Range:  88 - 108 MHz

Sensitivity:  1,0 µV for 20 dB quieting at 100% mod.;  1,8 µV (IHFM Standard)

FM Stereo Separation:  35 dB at 1 kHz

FM Distortion:  less than 1%

FM Stereo Frequency Response:  50 - 15,000 Hz ±1 dB

Other Special Features:

Muting; Two Nuvistor cascode front-end; Meter tuning; Double limiter; FM stereo indicator; Heavy flywheel tuning; Solid state AFC

AM Section

Frequency Range:  535 - 1605 kHz

IF Selectivity:  6 kHz, 12 kHz  -3 dB

Sensitivity:  5 µV (IHFM standard)

iF Frequency:  455 kHz

Semiconductors:

Tubes: 2 x 6CW4 (Nuvistor); 3 x 6BA6 9EF-93); 1 x 68E6(EK-90); 2 x 6AU6(EF-94); 3 x 6AQ8(ECC-85); 2 x 12AX7(ECC-83); 1 X 12AU7(ECC-82); 1 x 6BL8; 2 x 6AN8; 4 x 7591

Transitors: 4 x 25B-381

Diodes: 12 x OA-91; 1 x MA-301; 2 x SD-1B; 1 x TC-02P

Power Requirements:  100,117, 240 volts 50/60 Hz

Power Consumption:  180 VA

Dimensions (W x H x D):  17-7/8" x 5-1/2" x 14-3/16"

Weight:  44,7 lbs 

Goodmans Triaxiom 212

 Need proff of the clear, clean, true sound reproduction of a loudspeaker by Goodmans. First, check the response curves charted below.

They dramatically reveal the smooth, undistorted frequency response over the audio spectrum. Translated into musical terms, the Goodmans speaker reproduces sound with proper balance, clarity and realism … achieving perfect separation of instruments, peak-free highs and well-defined, clear bass tones. This quality instrument is the perfect example of British precision and craftsmanship.

One of the many outstanding custom features on all goodmans speaker is the "Rigid-Flex" cone … a completely flexible, free-floating cone rim and completely rigid cone center to provide pure piston action.

Triaxiom 212 Features:

Finest value ever offered in an integrated 12" three-way loudspeaker.

Extra-heavy, high-efficient magnets for maximum performance.

Smooth, undistorted response from 20 to 20,000 Hz.

Unusually sturdy construction with rigid, die-cast chassis.

Power handling capacity is 25 watts

Total flux is 178,000 Maxwells.

Jensen TR-30

 TR-30 Tri-Ette, 3-way loudspeaker system

We belive you will agree that the new Jensen loudspeaker system, is the finest small systemproduced regardless of cost. Superior quality precisely engineered components, brilliantly matched and balanced, provide the ultimate in home speaker performance. And you have the choice of styling that includes smart Danish in warm Walnut, subtle Contemporary in clean Limed Oak, the elegance of Traditional Mahogany, authentic Provincial in lustrous Cherry or a special unfinished utility model to paint or stain as you choose… excellent for custom building-in, too. Furniture models are finished on all four sides providing the versatility of horizontal or vertical placement.

The accessory matching base creates a small-scaled consolette if you prefer. 

 TR-30 Tri-Ette Features:

Featuring a new advanced design 12" Flexair woofer with powerful Syntox-6 magnet and low distortion full 1" travel,… precisely coordinated with the Bass-Superflex enclosure to carry bass down lower and better than ever before. Advanced design improved compression midrange and supertweeter units for smooth, balanced, extended response. 

Specifications:

Input Impedance:  8 Ω

Power Rating:  30 watts

Frequency Range:  20 Hz to beyond audibility

Crossover Frequencies:  900 Hz and 6,000 Hz

Low Frequencies Driver:  12-inch woofer

Woofer Resonsnce:  30 Hz

Dimensions ( H x W D):  16,25" x 25,5" x 11,75"

Sherwood S-5000

 The "new" Sherwood S-5000 dual amplifier preamplifier makes possible either stereo or monaural high-fidelity systemoperation with only one set of basic coordinated controls, yet offers every important control feature essential to both stereo and monaural operation. These include 10 two-channel controls, stereo normel/revers switch, phase inversion switch, and dual amplifier monaural operation with either set of input sources. The five modes of operation; stereo, stereo-reversed, monaural 1, monaural 2, monaural 1 + 2, are selected by the function switch which also operates a corresponding group of indicator lites to identify the selected operating mode.

All controls operate both channels simultaneously. In addition, the bass and treble controls feature friction-locked shafts which also allow the adjustment of one channel separately from the vertical rumble and noise components balanced out. A tape monitor switch permits instant comparison of recording input signal to tape with recorded output from tape when used with recorders offering monitor heads.

 Special features:

Stereo-monaural indicator lights

Dual/single bass and treble control

Compensated ganged loudness control

Plays monaural records with vertical rumble and noise balanced out

Stereo normal/reverse switch

Phase inversion switch

Ganged presence rise switch

Ganged phono and scratch filter switches

Ganged tape monitor switch

Stereo balance controls both channel

Six high level inputs

Four phono/tape preamp inputs

3rd channel output

Two tape monitor inputs and recording outputs

Speaker damping factor selection

Color coded cables and receplacles

 The Model S-5000 also can be used as a 40 watt monophonic "starter" system planned for later conversion to a 20 + 20 watt stereophonic system. The interchange from a 40 watt single amplifier to a 20 + 20 watt dual amplifier is accomplished by a single front panel switch. This circuit connection features the full sum of the 2 separate amplifierrs' outputs instend of using the power-robbing parallel connection commonly used.

All Sherwood amplifier now provide selectable damping factors of 10/1 (normal) or 2/1 (for use with today's popular compact speaker systems).

 The Sherwood S-5000 Function Selector operates its associateed indicator lites to identify the source-speaker combination selected. This exclusive feature, which also serves as the off-on pilot lite, tells at a glance which stereo or nonaural function has been selected as shown in the chart at right. Note especially the last position, :Mono S1 & 2" which connects a stereo phono pickup in such a manner that the vertical rumble and scratch components are balanced out for use with monaural records.

Important aids to flexibility of stereo system operation are the bass and treble controls included in the Model S-5000. each control features friction locked dual knobs. With normal usage, the main knob on each control operates both left and right hand channels  simultaneously due to its friction-locked concentric shafts. In addition, one channels tone may also be adjusted independently of the other. This is possible, because the 2nd-channel indicaqtor knob can also readily be adjusted without moving the 1st-channel knob as permitted by the friction -locked shafts. Afyer this independent adjustment, both channels  are again automatically ganged together for simultaneous operation by the main knob without upsetting the inter-channel relationship selected.

Specifications:

Power Output:

Monaural :  40 watts (80 watts peak) at 1½ %  IM distortion.

Stereo :  20 + 20 watts (40 + 40 watts peak) at ½% THD or 1½%IM distortion

Outputs:  16, 8 and 4 Ω for left and right speaker, 2 cathode follower recording outputs

Inverse Feedback:  18 dB

Damping Fcator:  10 : 1 normal

Frequency Response:  20 cps to 20 kc ±0,5 dB (at 20 + 20 watts)

Tone Control Response:  flat Setting, 20 cps to 20 kc ±½ dB

Tone Control Range:

At 15 kc :  20 dB boost or cut

At 40 cps :  16 dB boost, 19 dB cut

Rumble Filter:

At 27 cps :  18 dB rejection

At 100 cps :  less than 1 dB down

Preamp Equalizer Curves:

RIAA phono;  NAB tapehead, others w/tone controls

Controls and Switches (all controls and switches operate both channels):

Loudness control w/loudness compensation switch, dual/single bass and treble controls, stereo balance, presence rise, rumble-filter, and scratch filter switch, phono level, function switch selector switch, tape monitor switch, and output tube balance.

Balance Control range:  ±45 dB

Interchannel Crosstalk:  less than -50 dB at 1 kc

Sensitivity: 

Tuner :  0,20 V

Phono :  2 mV (adjustable with phono level control)

Max. Input Capability:

Tuner :  10 V for less than 1% IM distortion

Phono :  200 mV for less than 1% IM distortion

Max. Hum and Noise (volume controlat min. 90 dB weighted below rated output.)

Tuner Input  (controls max.):  80 dB (weighted) below rated output

Phono Input (control flat):  60 dB below rated output; 72 dB below 10 mV

Power Consumption:  at 110 - 120 V,  60 Hz is 110 W

Dimensions (W x D x H):  14 x 13 ½ x 4 inch

Weight:  29 lbs (shipping)

Sherwood S-7700

 The S-7700 FM/AM Receiver is similar to the S-8000 above but boasts  a full 80 watts music power output (each channel 40 watts music power or 36 continuous watts at 1,5 % IM distortion).

Other features found on this receiver are a Stereo Indicator Light to provide instant identification of those FM stations broadcasting stereo programs, wide-band 3-mc gated-beam FM limiter, and 1-mc balanced ratio detector which combine to create the pace-setting capture effect ratio of 2,4 dB.

The S-7700 also features outstanding AM broadcast reception with either a 15-kc wide "hi-fi" band pass or sharply selective 5-kc pass band selectable on the front panel. Also built-in ferrite AM rod antenna; no AFC circuit as on S-8000, 22 tubes plus 3 silicon rectifiers, 12 diodes. Size same as S-8000.

Specifications:

Power Output: 

Music Power :  40 watts each channel

Contiuous Power :  36 watts

Frequency Distortion:  20 Hz to 20,000 Hz to rated power ±0,5 dB

Sensitivity: 

Aux :  0,4 V

Phono :  1,4 mV

Tape :  1,6 mV

Max. Hum and Noise (below rated output, weighted): 

Aux :  75 dB

Phono :  63 dB

Inputs:  5 - high level;  4  low-level

Outputs:  4, 8 and 16 ohms

Sensitivity FM:

Typical :  0,95 µV for 20 dB

Quieting :  1,8 µV for -30 dB noise and distortion

Selectivity FM:  200 kHz at -3 dB

FM Detector:  1 MHz peak-to-peak

FM Distortion:  0,5%

Power:

Requirements :  115 - 125 V, 60 Hz

Consumption :  225 W

Tubes:  22,  3 silicon rectifiers,  and 12 diodes

Dimensions (Wx H x D):  16-1/2" x 4" x 14"

Sherwood S-8000

 With every performance capability of a separate tuner and amplifier, Sherwood's "new" S-8000 FM Stereo Multiplex Receiver is rapidly becoming one of the industry's most popular high-fidelity components.

This unit contains all of the electronics for a complete home music system on a single compact chassis. The S-8000 features two 32-watt amplifiers, complete with dual preamplifiers for phono and tape plus a highly sensitive FM tuner with complete wired-in circuitry for receiving FCC-approved FM multiplexed stereocasts. Just add speakers to complete your stereo home hi-fi music system.

  

The Model S-8000 integrates in one unit all of the important controls and perormance features offered separately on any of Sherwood's FM tuners, stereo amplifiers, and FM multiplex adapters. The usual concern about heat dissipation from a complex unit of this type has been solved by Sherwood design engineers. In the S-8000, the unique new Novar output tubes have been tilted toward the rear of the chassis so that tube heat is deflected away from other components by Sherwood's exclusive air-cooled heat baffle.

Specifications:

Power Output: 

Music Power :  32 watts each channel

Contiuous Power :  30 watts

Frequency Distortion:  20 Hz to 20,000 Hz to rated power ±0,5 dB

Sensitivity: 

Aux :  0,4 V

Phono :  1,4 mV

Tape :  1,6 mV

Max. Hum and Noise (below rated output, weighted): 

Aux :  75 dB

Phono :  63 dB

Inputs:  5 - high level;  4  low-level

Outputs:  4, 8 and 16 ohms

Sensitivity FM:

Typical :  0,95 µV for 20 dB

Quieting :  1,8 µV for -30 dB noise and distortion

Selectivity FM:  200 kHz at -3 dB

FM Detector:  1 MHz peak-to-peak

FM Distortion:  0,5%

Power:

Requirements :  115 - 125 V, 60 Hz

Consumption :  225 W

Tubes:  21 plus 4 silicon rectifiers,  and 7 diodes

Dimensions (Wx H x D):  16-1/2" x 4" x 14"