B&O Beogram 3404

Bang & Olufsen Beogram 3404

Meet the Beogram 3404, an intelligent, thoughtful an dvery well spoken turntable.

Like all Bang & Olufsen turntables, the 3404 effectively combines superior sound reproduction  with simplified - not complicated - operation. That's the real beauty of the 3404. that's why the controls are outside of the dust cover where they're easily accessible.

And that's why just a light touch of the Start button does everything. It determines if a record is on the platter, and if so, quickly sets the correct speed and lowers the stylus to the record.

Slam. Pound the shelf next to the 3404. not a skip, not a jump; thanks to the rock-steady patendted suspension system. Audible acoustic feedback disappears as a result.

A low inertia tonearm with a knife-edge bearing system eliminates audible distortion.

The Bang & Olufsen MMC cartridge works in flawless harmony with the tonearm. The unique self-correcting electronic servo-drive is so precise that the need for a conventional strobe device is eliminated.

 the Beogram 3404 even responds to remote control commands when used with the beomaster 2400 receiver.

Specifications

Speeds:  33-1/3 and 45 rpm

Speed Control range:  better than ±3%

Wow and Flutter:  less than ±0.06%

Rumble Weighted:  better than 65 dB

Rumble Unweighted Better than 45 dB

Drive System:  Flat belt

Motor:  Servo controlled DC

Pick-up Section MMC20E

Recommended Tracking Force:  15 mN/1,5g

Frequency Range:  20 -20,000 Hz ±2,5 dB

Channel Separation: better than 20 dB (1000 Hz)

Channel Difference:  less than 2 dB

Stylus:  Elliptical diamond

ETM: 0,5 mg

Radius of Curvature:  5 x 17 µm

Compliance:  20 µm/mN

Sensitivity:  better than 0,6 mV/47 k Ω

Output (5 cm lateral RMS):  better than 2,12 mV/47 k Ω

Power Supply: 110 or 220 V  50/60 Hz

Power Consumption:  8 W

Dimensions (WxHxD):  440 x 85 x 370 mm

Weight:  6,5 kg