Bang & Olufsen Beogram 3404
Meet the Beogram 3404, an intelligent, thoughtful an dvery well spoken turntable.
Like all
Bang & Olufsen turntables, the 3404 effectively combines superior sound
reproduction with simplified - not
complicated - operation. That's the real beauty of the 3404. that's why the
controls are outside of the dust cover where they're easily accessible.
And that's
why just a light touch of the Start button does everything. It determines if a
record is on the platter, and if so, quickly sets the correct speed and lowers
the stylus to the record.
Slam. Pound
the shelf next to the 3404. not a skip, not a jump; thanks to the rock-steady
patendted suspension system. Audible acoustic feedback disappears as a result.
A low
inertia tonearm with a knife-edge bearing system eliminates audible distortion.
The Bang
& Olufsen MMC cartridge works in flawless harmony with the tonearm. The
unique self-correcting electronic servo-drive is so precise that the need for a
conventional strobe device is eliminated.
the Beogram 3404 even responds to remote
control commands when used with the beomaster 2400 receiver.
Specifications
Speeds: 33-1/3 and 45 rpm
Speed
Control range: better than ±3%
Wow and
Flutter: less than ±0.06%
Rumble
Weighted: better than 65 dB
Rumble
Unweighted Better than 45 dB
Drive
System: Flat belt
Motor: Servo controlled DC
Pick-up
Section MMC20E
Recommended
Tracking Force: 15 mN/1,5g
Frequency
Range: 20 -20,000 Hz ±2,5 dB
Channel
Separation: better than 20 dB (1000 Hz)
Channel
Difference: less than 2 dB
Stylus: Elliptical diamond
ETM: 0,5 mg
Radius of
Curvature: 5 x 17 µm
Compliance: 20 µm/mN
Sensitivity: better than 0,6 mV/47 k Ω
Output (5 cm
lateral RMS): better than 2,12 mV/47 k Ω
Power
Supply: 110 or 220 V 50/60 Hz
Power
Consumption: 8 W
Dimensions
(WxHxD): 440 x 85 x 370 mm
Weight: 6,5 kg
No comments:
Post a Comment