Non
-Switching Stereo Amplifier
Continuous
average power output of 70 watts per channel, min. at 8 ohms, from 20 Hz to 20
kHz with no more than 0,009% Total Harmonic Distortion
Non-Switching
Power Amplifier
Eliminates
switching distortion and drastically reduces all other types of distortion
while reatining high efficiency.
Low-noise
phono equalizer
Features an
FET input to assure wider dynamic range and lower distotion from any record.
LED
indicators
Include
7-segment power indicator for each channel and indicators for each input
Other
features include: Tape dubbing, A/B
speaker drive, Loudnes contour control.
Specifications:
Continuous
Power Output:
Continuous
average power output of 70 watts per channel,
(min. at 8 Ω, from 20 Hz to 20 kHz
with no more than 0,009% T.H.D.)
Total
Harmonic Distortion (20-20,000 Hz, 8 Ω):
0,009% (continuous rated power output)
Intermodulation
Distortion (50 Hz :7,000 Hz =4;1; 8 Ω, from Aux):
Damping
Factor (20 - 20,000 Hz, 8 Ω): 50
Input
Sensitivity/Impedance:
Phono MM
: 2,5 mV/50 k Ω
Tuner, Aux,
Tape : 150 mV/50 k Ω
Phono
Overload Level (1 kHz): 150 mV
Output
level/Impedance:
Tape REC
: 150 mV
Speaker
: A, B, A+B, OFF
Headphones
: Low Impedance
Frequency
Response:
Phono (RIAA
Equalization) : 20 - 20,000 Hz ±0,2 dB
Tuner, Aux,
Tape Play : 10 - 70,000 Hz 0 dB -3 dB
Tone
Controls
Bass : ±10 dB at 100 Hz
Treble
: ±10 dB at 10 kHz
Loudness
Contour (volume at -40 dB position): +6
dB (100 Hz ), +3 dB (10 kHz)
Hum and
Noise (IHF, A-network)
Phono Music
: 86 dB
Tuner, Aux,
Tape Play : 102 dB
Power
Requirement: 120 V 60 Hz
Power
Consumption: 190 W
Dimensions
(W x H x D): 420 x 98 x 287 mm
(16-9/16" x 3-7/8 " x 11-5/16")
No comments:
Post a Comment