The Toshiba 7150 locks into the center of any station's assigned broadcast frequency and eliminates drift.
A few yearas
ago, Toshiba introduced and marketed the first fully electronic
digital-synthesized tuner. Now Toshiba has another first. We've built a
digital-synthesized tuner into a high-powered, low-distortion FM/AM receiver;
the Toshiba 7150 with Synthetune™
Synthetune
is a function that provides tuning so accurate even a center tuning meter is
unnecessary.
Drift is eliminated.
Drift is eliminated.
The 7150's
FM tuner section also contains flat group delay IF circuitry. And a quartz
crystal oscillator, which automatically locks into the center of any station's
assigned broadcast frequency - as precisely as the station's own transmitter.
Tune the
7150 just by pushing the auto-scan button. It scans the full range of the AM or FM band, stopping precisely at each
listenable station. Bright green LED numerals instantly display all frequencies
as they are tuned. Of course, there's more to the 7150 than Synthetune. It also
has separate transformers for class A and class B amplifier sections. The
toroidal transformer for class B amplification has separate left and right
power supplies.
It also has
Dolby FM and an air check switch for accurate tape recording. Furthermore the
7150 delivers a minimum of 150 watts per channel into 8 ohms, 20 Hz to 20,000
Hz , with no more than 0,05% Total Harmonic Distortion. And the restof the
specs are just as impressive.
Specifications
Continuous
Power Output: 150 W/channel (min. RMS at
8 Ω, 20-20,000 Hz , no more than 0,05% T.H.D.)
PoweR
Output:
At 4 Ω
: 2 x 230 W (20 - 20,000 Hz both channel
driven
At 8 Ω
: 2 x 160 W (1 kHz both channel driven)
At 4 Ω
: 2 x 250 W ( 1 kHz both channel driven)
Total
Harmonic Distortion ( at 8 Ω)
At Rated
Power Output : 0,05%
At 1 W
: 0,03%
Intermodulation
Distortion: 0,05%
Damping
Factor: 50
Input
Sensitivity/Impedance:
Phono 1
: 2,5 nV/47 k Ω
Phono 2
: 2,5 mV/ 47 k Ω (100p/250p/450pF)
Tuner, Tape,
Aux: 150 mV/47 k Ω
Phono
Overload level: 350 mV RMS at 1 kHz
Output level
Tape REC
: 150 mV
DIN : 30 mV
Pre Out
: 1000 mV
Frequency
Response:
Phono (RIAA
Equalization) : 30 Hz to 15 kHz; ±0,2 dB
Aux, Tape
: 10 Hz to 50 kHz; +0,5 -1 dB
Tone Control
Bass : ±10 dB at 100 Hz
Treble
: ±10 dB at 10 kHz
Turnover
Frequency: 200/400 Hz; 2,5 K/5 kHz
Loudness
Contour: +8 dB at 100 Hz +4 dB at 10 kHz
Signal-to-Noise
Ratio(IHF short-circuited A network rated power)
Phono : 80 dB
Aux, Tape
: 95 dB
Filter
Low : 20 Hz -6db/oct
High : 7 kHz
-6 dB/oct
FM Tuner
Section
Usable
Sensitivity: Mono 9,8 dBf 91,7 µV)
50 dB
Quieting Sensitivity:
Mono 14,7
dBf (3,0 µV)
Stereo 37,6
dBf (42 µV)
Signal-to-Noise
Ratio:
Mono : 75 dB
Stereo
: 70 dB
Distortion
[Wide/Narrow]
At 100 Hz
: Mono 0,08/0,1%; Stereo 0,1/0,2%
At 1 kHz
: Mono 0,08/0,1%; Stereo 0,1/0,2%
At 6 kHz
: Mono 0,1/0,2%: Stereo 0,15/0,25%
Frequency
Response: 20 Hz to 15 kHz ±0,5 dB
Alternate
Channel Selectivity:
Wide : 50 dB
Narrow
: 80 dB
Capture
Ratio: 1,0 dB
Spurious
Response Ratio: 100 dB
Image
Rejection Ratio: 85 dB
IF Rejection
Ratio: 100 dB
AM
Suppression Ratio: 55 dB
Stereo
Separation: 50 dB (1 kHz); 35 dB (30 Hz
-15 kHz)
AM Tuner
Section
Sensitivity: 350 µV/m (IHF, ferrite antenna)
Selectivity: 30 dB
Signal-to-Noise
Ratio: 50 dB
Image
Rejection Ratio: 40 dB
Miscellaneous
Power
Requirements: AC 120 V, 60 Hz - 220- 240
V 50/60 Hz
Power
Consumption: 650 watts (UL) 6,8 A (CSA)
Dimensions
(W x H x D): 550 x 200 x 500 mm
No comments:
Post a Comment