AM /FM Stereo Receiver
Specifications
Amp lifier Section
Continuous Power Output:
From 20 t0 20,000 Hz (0,1% T.H.D.)
35 watts per channell at 8 Ω (min. RMS)
45 watts per channel at 4 Ω (Min. RMS)
At 1 kHz Both Channel Driven:
40 watts x 2 at 8 Ω
50 watts x 2 at 4 Ω
Total Harmonic Distortion: 0,1% at rated power output
IM Distortion: 0,1%
Damping Factor: 50
Input Sensitivity/Impedance:
Phono : 2,5 mV / 47 k Ω
Aux : 150 mV / 47 k Ω
Tape 1, 2 : 150 mV / 47 k Ω
Phono Overload Level : 200 mV RMS at 1 kHz
Output Level
Tape Rec 1, 2 : 150 mV
DIN : 30 mV
Frequency Response:
Phono (RIAA Equalization) : 30 Hz - 15 kHz ±0,3 dB
Aux, Tape : 10 Hz - 40 kHz -1,0 +0,5 dB
Tone Control:
Bass : ±10 dB at 100 Hz
Treble : ±10 dB at 10 kHz
Loudness Contour:
+8 dB at 100 Hz
+4 dB at 10 kHz
Signal-to-Noise Ratio (IHF short-circuited A network, rated power)
Phono : 72 dB
Aux, tape : 95 dB
FM Tuner Section
Usable Sensitivity [mono[: 10,8 dBf (1,9 µV)
50 dB Quieting Sensitivity:
Mono : 16,0 dBf (3,5 µV)
Stereo : 39,2 dBf (50 µV)
Signal-to-Noise Ratio:
Mono : 75 dB
Stereo : 68 dB
Distortions
At 100 Hz : 0,15% [mono]; 0,2% [stereo]
At 1 kHz ; 0,15% [mono]; 0,2% [stereo]
At 6 kHz : 0,25 [mono]; 0,3% [stereo]
Frequency Response: 20 Hz to 15 kHz -1,5 +0,5 dB
Capture Ratio: 1,0 dB
Alternate Channel Selectivity: 65 dB
Spurious Response Ratio: 75 dB
Image Rejection ratio: 60 dB
IF rejection ratio: 90 dB
AM Suppression ratio: 50 dB
Stereo Separation: 45 dB (at 1 kHz); 30 dB (30 Hz - 15 kHz)
AM Tuner Section
Sensitivity: 300 µV /m (IHF, ferrite antenna)
Selectivity: 35 dB
Signal-to-Noise Ratio: 50 dB
Image Rejection Ratio: 45 dB
Miscellaneous
Power Requirements: AC 220/240 50 Hz
Power Consumption: 270 watts
Dimensions (W x H x D): 450 x 145 x 400 mm
Weight: 11,5 kg
No comments:
Post a Comment