Toshiba SA-735 receiver

AM /FM Stereo Receiver

Specifications

Amp lifier Section

Continuous Power Output:

From 20 t0 20,000 Hz (0,1% T.H.D.)

35 watts per channell at 8 Ω (min. RMS)

45 watts per channel at 4 Ω (Min. RMS)

At 1 kHz Both Channel Driven:

40 watts x 2 at 8 Ω

50 watts x 2 at 4 Ω

Total Harmonic Distortion:  0,1% at rated power output

IM Distortion:  0,1%

Damping Factor:  50

Input Sensitivity/Impedance:

Phono :  2,5 mV / 47 k Ω

Aux :  150 mV / 47 k Ω

Tape 1, 2 :  150 mV / 47 k Ω

Phono Overload Level :  200 mV RMS at 1 kHz

Output Level

Tape Rec 1, 2 :  150 mV

DIN :  30 mV

Frequency Response:

Phono (RIAA Equalization) :  30 Hz - 15 kHz ±0,3 dB

Aux, Tape :  10 Hz - 40 kHz -1,0 +0,5 dB

Tone Control:

Bass :  ±10 dB at 100 Hz

Treble :  ±10 dB at 10 kHz

Loudness Contour: 

+8 dB at 100 Hz

+4 dB at 10 kHz

Signal-to-Noise Ratio (IHF short-circuited A network, rated power)

Phono :  72 dB

Aux, tape :  95 dB

FM Tuner Section

Usable Sensitivity [mono[:  10,8 dBf (1,9 µV)

50 dB Quieting Sensitivity:

Mono :  16,0 dBf (3,5 µV)

Stereo :  39,2 dBf (50 µV)

Signal-to-Noise Ratio:

Mono :  75 dB

Stereo :  68 dB

Distortions

At 100 Hz :  0,15% [mono]; 0,2% [stereo]

At 1 kHz ;  0,15% [mono]; 0,2% [stereo]

At 6 kHz :  0,25 [mono]; 0,3% [stereo]

Frequency Response:  20 Hz to 15 kHz -1,5 +0,5 dB

Capture Ratio:  1,0 dB

Alternate Channel Selectivity:  65 dB

Spurious Response Ratio:  75 dB

Image Rejection ratio:  60 dB

IF rejection ratio:  90 dB

AM Suppression ratio:  50 dB

Stereo Separation:  45 dB (at 1 kHz); 30 dB (30 Hz - 15 kHz)

AM Tuner Section

Sensitivity:  300 µV /m (IHF, ferrite antenna)

Selectivity:  35 dB

Signal-to-Noise Ratio:  50 dB

Image Rejection Ratio:  45 dB

Miscellaneous

Power Requirements:  AC 220/240 50 Hz

Power Consumption:  270 watts

Dimensions (W x H x D):  450 x 145 x 400 mm

Weight:  11,5 kg